Cutting Tools in Vellore

Laser Cut Components

T40 Torx 2 Inch Power Bit Bulk

Cutting Tool

Fly Cutter

Cutter Wheel

Granite Wire Saw Rope

Cutting Tool

Laser Cut Components

Bimetal

These cutters are used to produce chamfers along involute profile of gears at end faces Normally, it is used after gear cutting by hobbing or shaping process Cutters are supplied in pairs and to suit gear profile

shaping cutters

Cutting Tools

Module, DP and CP series Shaper Cutters are supplied by MHI-IPT Various forms of Shaper cutters such as non-topping, semi-topping, topping, finishing, roughing, pre shaving or pre grinding, with or without protuberance, etc., are manufactured Both spur type and helical type Gear Shaping cutters are made Designing and Production of relief ground Shaping cutters for involute splines, worms (cutter to be used in hobbing machine by kinematics inversion process) and relief machined cutters for sprocket, parallel sided splines etc., are done at MHI-IPT The range of Shaping cutters available at MHI-IPT includes different varieties of disc type, hub type and shank type. Tandem Shaping cutters are also supplied Shaper cutter material is generally M35 (6-5-2+5%Co). On special request, Shapers made in powder material (ASP 2030, ASP 2052) and TiN coated Shapers are supplied Normally, accuracy classes are as per DIN 1829 Standard AA,A. However Shaper cutters are made to suit other accuracy Standards also. Gear Shaper: Spur, Helical,Sprocket Shaper

1. Module, DP and CP series Shaper Cutters are supplied by MHI-IPT 2. Various forms of Shaper cutters such as non-topping, semi-topping, topping, finishing, roughing, pre-shaving or pre-grinding, with or without protuberance, etc., are manufactured 3. Both spur type and helical type Gear Shaping cutters are made 4. Designing and Production of relief ground Shaping cutters for involute splines, worms (cutter to be used in hobbing machine by kinematics inversion process) and relief machined cutters for sprocket, parallel sided splines etc., are done at MHI-IPT 5. The range of Shaping cutters available at MHI-IPT includes different varieties of disc type, hub type and shank type. Tandem Shaping cutters are also supplied 6. Shaper cutter material is generally M35 (6-5-2+5%Co). On special request, Shapers made in powder material (ASP 2030, ASP 2052) and TiN coated Shapers are supplied 7. Normally, accuracy classes are as per DIN 1829 Standard AA,A. However Shaper cutters are made to suit other accuracy Standards also.

Cutting Tools

Cutting Blades

cutting tools

Cut Component

Cutting Blades

Cut Leather Components

Cutting Blades

Cutting Tool Sets

Cutting Blades

Cutting Tool

Cutting Tools

Cutting Blades

Hewing Tools