Control Cable in Alwar (कंट्रोल केबल, अलवर)

YASKAWA YRC1000 TEACH PENDANT CABLE HB1371456-1

We provide Control Cable. Features: Low Smoke Fire Resistant Zero Halogen Long Life

VOLTAGE : These cables can be used on AC Voltage up to including 1100 V or DC up to including 1500 V. Size : 1.5 Sq. mm. 2.5 Sq. mm. up to 61 Cores in Control Cable. CONDUCTOR : Annealed Bare Electrolytic Copper, Solid / Stranded conforming to IS:8130:1984.. INSULATION : Conductor are insulated with PVC Compound as per IS:5831:1984. On demand insulation is provided with XLPE also. COLOR OF CORES : Cores are identified with a color scheme as per IS:1554(Pt-I):1988 as under 1 Core - Red, Black, Yellow, Blue 2 Cores - Red Black 3 Cores - Red, Yellow Blue. 3 4 Cores - Red, Yellow, Blue Black. (Reduced Neutral Core in case of 3 Core) 5 Cores - Red, Yellow, Blue, Black Grey In case of cable exceeding five cores, two adjacent (counting and direction cores ) in each layer shall be colored Blue, Yellow and remaining cores grey / Cores can be identified by numbers by numerals on the outer surface of the core as per IS : 1554 : Part-1 : 1988 IS : 7098 : Part-1 : 1988 or as per customer requirement. LAYING Of CORES : Cores are laid up with a suitable lay. The Final layer direction shall be kept right hand lay. INNER SHEATH : The Inner Sheath is applied over laid up of cores by extrusion. ARMOURING : Armouring is applied over inner sheath incase the calculated diameter over inner sheath does not exceed 13 mm, the armour consists of galvanized round steel wires. Where the calculated diameter over the inner sheath is greater than 13 mm the armour generally consists of flat steel. If required, the cable can be manufactured with steel wire where calculated diameter of cable exceeds 13 mm. Single core cables are provided with Aluminium Wire/Strip armouring. OUTER SHEATH : A final covering of PVC Compound, conforming to IS:5831:84, is applied over Armoring in case of Armored Cable or over Inner Sheath in case of Unarmored Cable, called as "Outer Sheath". The Insulation, Inner Sheath outer sheath can be HR PVC, FRLS PVC or FRHF Compound depending upon their application.

KEI Control cables encompass a large family of cables manufactured to various IS, BS, EN, VDE, and other international Standards. Our cables are designed for a wide range of application like industrial, signaling, transmission, measurement, control and regulation. These cables allow to transmit power at very low voltage to control the process or equipment. Applications These control cables are mainly used in machinery, machine tools and appliances, measuring, control, heating and air conditioning technologies for permanent connections in cable chains, etc Features These cables have a copper conductor, which may or may not be enveloped in galvanized steel braid.These cables can be manufactured as per any applicable standardThese cables can be manufactured for Zero Halogen properties or high thermal stability PVC over sheathed.They also offer various degrees of protection against electrical interference and resistance to caustic substances and oils. Why our Control Cables Our halogen-free cables and wires are internationally certified and you can choose from our comprehensive range of standard products or can ask for cables /wires with special properties to meeting your requirement.

We manufacture Copper Control Cables for a wider range of applications in various industries. Its specifications are : Up to 61 cores armoured / unarmoured in 1.5 2.5 sq. mm. Solid / standard circular copper conductor.

KEI INDUSTRIES LIMITED is manufacturing LT Power Cables with PVC or XLPE insulation of voltage grade upto 3.3 KV conforming to various Indian and International Standard Specifications.

CONTROL CABLES

Control Cable

LT Control Cables

1.5 SQMM Control Cables

Control Cable Systems

LV POWER CONTROL CABLE 1100V

Control Cables

Lt Control Cables

LT CONTROL CABLES

Control Cable

Power And Control Cable

Control cables are used for power supply to the control circuits. Cables are manufactured as per IS, BS & IEC standards as per the requirement of customers. ConductorSolid or stranded bare or tinned circular annealed conductor InsulationPVC/XLPE insulated CoreCore identification by colour coding or by number printing, cores stranded and covered with extruded PVC layer, galvanised steel wire or strip armoured. Inner & Outer SheathPVC black or as required. In case of unarmoured type cables, overall sheath is provided on inner sheath.

Current ratings for PVC insulated Copper Conductor 1.1 KV grade cables

We are manufacturer of XLPE/PVC Power Control Cables as per IS :7098 Part-I IS : 1554 Part-I. Make- UNIWIRE Cable

These cables are used for power supply to the control circuits. Cables are manufactured as per IS, BS IEC standards as per the requirement of customers. Control Cables (Unscreened) These cables are used for power supply to the control circuits. Cables are manufactured as per IS, BS IEC standards as per the requirement of customers. Conductor Solid or stranded bare or tinned circular annealed conductor Insulation PVC/XLPE insulated Core Core identification by colour coding or by number printing, cores stranded and covered with extruded PVC layer, galvanized steel wire or strip armoured. Inner and Outer Sheath PVC black or as required. In case of unarmoured type cables, overall sheath is provided on inner sheath.

Feature and Benefits: Conductor Type : Solid (Annealed Bare Copper) Conductor Size (mm) 0.53 (Before Stranding)

Power And Control Cables

LT Control Cables

Control Cable

Control Cables

LT CONTROL CABLES