Computerized Universal Testing Machine in Ambala (कंप्यूटराइज्ड यूनिवर्सल टेस्टिंग मशीन, अंबाला)

Universal Testing Machine Computerized, Capacity, 1000 IN, 6 pillar type with Hydraulic Jaws Technical Specifications: Machine capacity: 1000 KN Machine type: 6 Pillar with Hydraulic Jaw set Hydraulic Jaw set Hydraulic Jaw set Load Resolution: 0.01 KN Elongation Scale Resolution: 0.01 mm Extensometer Resolution: 0.001 mm Max Clearance for tensile test: 50-800 mm Max Clearance for compression test: 0-800 mm Clearance between columns: 540-650 mm Ram Stroke: 200-250 mm Straining/piston speed at no load: 0400 mm/min Extensometer: Electronic extensometer strain gauge type with 25 mm extension and gauge length 25 50 mm For Tension test, Clamping jaws for round specimens: 8=16 mm, 20-40 mm, 40-60 mm Clamping jaws for flat specimen thickness: 0-40 mm Flat specimen width: 70-110 mm For Compression test: Pair of compression plates Dia of circular platen: 200-233 mm For Transverse test: Table with the adjustable rollers Width of rollers: 160 mm Diameter of rollers: 50 mm Max clearance between supports: 600 mm Radius of punch tops: 16mm, 22 mm Crosshead geared motor (kW): 0.74kW Power pack motor (kW): 2.2kW Weight (approx.): 3500kg Suitable for operation on 440 V, 50 Hz, three phase, AC supply

Universal Testing Machines - Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Universal Testing Machine Hydraulic Computerized Version. APPLICATION SYSTEM:Peak Load along with on line loadMaximum elongation with online elongationUltimate Tensile StrengthGraphical Display of load vs. timeGraphical Display of elongation vs. timeGraphic Display of load vs. elongationGraphic Display of stress vs. strainComplete Statistical AnalysisData report management SAFETY FEATURES:Machine stops after specimen failureSafety against over travel of pistonSurge protectorAuto machine diagnosisSafety against overload

Universal Testing Machine Computerized MSW-014UTM: designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted. 1000KN is designed to perform tensile, compression, bending and shear tests on most widely varying materials, both in form of test pieces and as finished products. Hardness test on metals can also be performed. Salient Features: o Loading Accuracy as high as 1%o Straining rate to cover a wide range of materialso Continuous roll type load elongation recordero High reading accuracy due to the large size and design of the dialo Simple controls to facilitate ease of operationo Fully enclosed and protected load measuring systemo The wide range of standard and special accessories including load stabilizero Robust straining frameo Suitable for the standard specimen and also structures.o Motorized UP / DOWN movement of lower crosshead to enable easy and rapid fixing of the test specimen.o Autoload selection facility The machine consists of Straining Unit, Control panel (Powerpack, complete with drive motor and an oil tank, control valve, a pendulum dynamometer, a load indicator system and an autographic recorder. NOTE: Manual and Digital Machine also available.

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Computerized Universal Testing Machine.Specification 400/440V, 50Hz Three Phase A.C Supply 1.5 H.P with hydraulic system Designed to perform variety of tests like tension, compression, etc. on metallic materials. Continuous roll autographic load recorder Provision for computer with user friendly software Auto detection and switching off provision in case of over load, over travel and specimen break. Analogue and computerized control panel Capacity 200KN Max. Range 10-200KN +-0.1 KN Min. Range 0-20KN +-0.01KN Maximum tensile clearance at full (50-700 mm) decedent piston position Distance between columns 500 mm. Piston stroke approx 200 mm. Max Clearance for compression rest 0-700(mm) Max. Straining speed at No. Load 150(mm / min)Standard Accessories Pair of compression plates dia 120 mm For Tension Test Jaws Round specimen dia 10-20 mm Round specimen dia 20-30 mm Flat specimen thickness 0-10 mm Flat specimen thickness 10-20 mm Max. width for flat specimen 50 mm For Transverse Test Adjustable Roller Support of width approx. 150 mm Adjustable Roller Support of dia. approx. 30 mm With max adjustable clearance approx. 500 mm RS232 Serial Port/Data Cable Optional Accessories Extensometer Load rate Control Load rate stabilizers Flat Belt test Bolt nut and Washer test Single and double shear test Tensile test for shouldered and threaded Bend Re-bend test

Universal Testing Machine