Loop Powered Indicators in Bhavnagar (लूप संचालित संकेतक, भावनगर)

Power Source: Two-wire loop powered (4-20mA input). Display: Options for a 4-digit, high-contrast LCD or bright LED display. Indication Range: The display is programmable for any value between -1999 to 9999. Configuration: Easy scaling and configuration using three front-panel pushbuttons. Accuracy: High accuracy of 0.1% of full scale. Mounting Options: Available in both panel-mount and wall-mount models to suit different installation needs. Environmental Protection: The panel-mount models have an IP65-rated front panel, while the wall-mount models have an overall IP65-rated housing. Advanced Options: A flame-proof (explosion-proof) version, model LPI-1-XP, is available for hazardous areas (Gas Groups IIA/IIB, Zone 1 2).

Parameter Details Manufacturer Dynalco (A Barksdale Brand) Model LMD-120D Input Signal $4\text{--}20\text{ mA}$ DC Power Requirement Loop-Powered (Draws power from the signal) Voltage Drop Approx. $3.0\text{ V}$ at $20\text{ mA}$ Display 3.5 Digit LCD (Large, high-visibility digits) Enclosure Rugged, sealed design (Typically fits a 3-3/8" hole) Temperature Range $-20^\circ\text{C}$ to $+70^\circ\text{C}$

Measurement Technology MTL 634 Loop Powered IS Indicator BAS No.EX84B2158 Vmax=60Volts Imax=666mA Tamb=60 C Made in England

Dynalco LMD-120A Signal Powered Digital Indicator LMD 120A-263 0-5000 PSI Vmax:40V Imax:200mA Ci:0 Li:0 Made in U.S.A

beka associates ba307e loop powered four digit panel indicator the ba307e loop powered 4/20ma indicator is a fourth generation instrument that is electrically and mechanically compatible with the earlier industry standard ba307c, but has a much larger full 4 digit display providing maximum visibility from a 96 x 48mm instrument. the new model has guaranteed performance between -40 & 70 c, dust certification and an even shorter enclosure depth than its predecessor. The scale card can easily be marked to show the units of measurement and be installed on-site without dismantling the indicator enclosure or removing it from the panel. If the units of measurement are not specified when the indicator is ordered, a blank scale card will be fitted.

Masibus LPI-1-XP Explosion Proof series Loop powered Indicator is available in two mounting types; Wall mount and 2 Pipe Mount, having LED display. Both models are two-wire loop powered and need no Auxiliary power. The voltage drop across the loop is limited to 5V maximum.

PR-5531B LOOP powered LCD Indicator.