Inserting Machine in Chennai

Manual Insertion Section

Features: Excellent functionalityConsistent performanceHigh strength

Machining Insert

Corner Insertion Machine

It is used for inserting fertilizer and granulates, Cleaning mossy surfaces, natural stone walls, Aeration and supply for tree roots, uncovering of roots during transplant and clearing applications, Resolving water logging, Undercutting and uncovering of foundations. Some other uses are: Sandblasting concrete, steel and reinforcement Uncovering of service lines Generating exploration shafts Breaking of wet-mix macadam Blowing out of pavement and brickwork joints Rough cleaning of construction equipment Uncovering and aeration of roots

PEM 2000 Serter Automatic insertion press for studs, nuts and fasteners (PEM). Extensive tool inventory for diverse studs, nuts, fasteners and automatic, color-coded feed of the fasteners. The PEM SERTER 2000 has menu-driven, programmable control, which minimizes the familiarization phase and simplifies operation. Tool changes can be handled in less than two minutes. Self-diagnosis reduces standstill times in the event of disturbances.

This machine is designed for paper inserting for the Rotor. Machine consist of Janiva mechanism with fixture for component. Cycle time: for 12 slot component 4 sec and for 42 slot component.

Features: Through hoting spot make the card magnetic strip mounted on the film of PVC or card material of PVC, which to ensure the position of magnetic stripe on the film or PVC card material. Operating Feature: Printed card material or PVC film put on the front table for orientation, then pull out the magnetic tape. There is a magnetic tape orientation structure in the middle of the table and moving position. The pull out magnetic stripe will be oriented and compacted in orientation structure. Then welding head will move down to jointing and cut off the magnetic tape, After finish the jointing , the welding head will move up. Insert the next sheet into the printed card or PVC film, then pull out the sheet that soldering well to moving position. The magnetic tape also will be pulled out orientation automatically. The next sheet can be soldered. Operating such as this again andagain. Equipment Feature: 1. Fixed position of the reamer mould, welding head part and welding head. Wide 58MMLong 88MM together 25 piece(5 x 5) space of a whole page. 2. The move up and down of reamer and jointing part was controlled by cylinder, when the jointing part move up, it will locked automatic to ensure saft if it was power off. 3. Equipment control box: spot welding temperature and time was controlled automatically. 4. Magnetic stripe orientation was compacted by cylinder.

Inserting Systems

Brass Insert Machine

Insertion Jaw