USB Programmers in Delhi (यूएसबी प्रोग्रामर्स , दिल्ली)

The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers USB ASP AVR Programming Device for ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed. Package Includes : 1 x USB ASP AVR Programming Device. 1 x FRC cable.

The ST-Link V2 Programmer for STM8 and STM32 is fully compatible with the official version, featuring automatic upgrades, full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) download and debug, and full range STM8 SWIM (just 4 Pins including SWIM, Reset, and power). Send programme code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers with this device. 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST), and GND is all connected in the ST-Link v2 programmer''''''''s header. This device''''''''s connector on the opposite side is a USB connector that is meant to be plugged into a computer. Features :PCB installed inside of aluminium alloy U disk shell, portable, safe and reliable!Interface definition directly marked on the shell, clear, convenient and practical!5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3VShell characters using laser engraving, never fade off! Permanent clarity!500mA internal resettable fuse, complete protection of your expensive computer motherboard!Red and blue colour LED indicator, allowing you to always observe ST-LINK V2 working condition!With the DuPont line, so you can easily respond to different target board line order.Use anti-static bag packaging.SWIM specific features:SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector1.65 V to 5.5 V application voltage supported on SWIM interfaceSWIM low-speed and high-speed modes supportedSWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speedSWIM cable for connection to the applicationDirect firmware update feature supported (DFU)Status LED which blinks during communication with the PCOperating temperature 0 C to 50 C

The UPA Full EEPROM Reader V1.3 is a professional and versatile tool used for reading and programming EEPROMs and microcontrollers (MCUs) in automotive, industrial, and electronic applications. This powerful device is designed to work with a wide range of EEPROM and MCU chips, enabling users to read, write, and clone data directly from the chip. It is commonly used by automotive technicians, locksmiths, and engineers for a variety of tasks, such as key programming, ECU remapping, and data recovery.

avr programmer usb

The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. This ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.

SOFI SP8 series is professional programmers specially for programming serial FLASH/EEPROM/SPI memories, with built-in 32-bit high-speed processors and USB2.0 communication interfaces. It supports high-speed programming of nearly all 24/25/93/BR90 chips. In the number of supportive serial memories and the writing speed, it greatly exceeds most general and similar special programmers that cost over 1000 RMB. It has a unique function of ISP online programming and supports more chips with continuous software upgrade. With exquisite shells made through professional mould opening and with advanced software/hardware design, SP8 series overtakes other similar products in both exterior and inner quality. SP8 programmers have SP8-A, SP8-B and SP8-F three types. SP8 is special programmers with the highest speed for programming serial memories (Note 1), the most types of supportive devices (Note 2) and the highest performance/price ratio in China. It fully satisfies the needs of home appliance and digit maintenance, engineering research and development, and mass production in factories USB2.0 communication interfaces (real USB interfaces, not USB to serial ports or simulated USB ports) Exquisite shells customized with opening moulds (cannot be caught by public-mould shells on the market), small (size: 103x71x23mm), and convenient to use and carry SP8 Fully supports WinXP/Vista/Win7, and perfectly combines 32-/64-bit systems For More Information Call or Enquiry us.

Universal USB Programmers

Programmer/usbASP AVR Programmer

USB ASP Programmer

8051 & AVR USB-ASP Programmer

AT89sXX USB Programmer AT89sXX USB programmer is an in-circuit programmer for Atmel AVR controllers. The programmer uses a firmware-only USB driver, no special USB controller is needed. It is complete solution for programming popular AVR series of micro controllers with ease. This is a USB based programmer. Many new computers and almost all laptops doesn't have a serial or parallel port, so hobbyist face a lot of problems because all easy to make programmers are either serial or parallel port based. Moreover, it is faster than those programmers so programming big MCUs is now a whole lot of fun.Can be used with Low Cost ATmega development board for quick and economical startup with AVR micros. Compatible with Windows XP, Windows Vista and Windows 7. Both 32bit and 64bit versions are supported.

Black Upa Especially Used For Eeprom And Mileage Adjustment programming

USB Programming Device Descriptions:This digital hearing aid programmer is used for resetting the parameters and programming of hearing aids. This digital hearing aid programming unit together with fitting software and programming cables constitute the complete system. It serves as a standardized interface between a PC and programmable hearing instruments.Technical Parameters:PC interface USB connecting line(Universal Serial Bus port)For the computer and USB programming connectionSpecification: Product Weight: 0.8kgPower Supply:USB The programming voltage enter from the USB port. Voltage:4.50V-5.25V Max Current:Output Range:The following output is for the left and right ears of the hearing aid device cable Common install battery,apply to left and right ears, 1.35V, 10/50m A (Current can be adjust by install the software ) Programmable battery,apply to left and right ears, -3.50V to +3.50V, 30m A(Voltage can be adjust by install the software)Suitable Operating Conditions:Temperature : +5 Cto+40 C(41 Fto+104 F) Humidity : 30 to 90%,non-condensing Preheating Time: Atmospheric Pressure: 600hpa to 1060 hpa Notice: Operate product in the temperature enviroment under -20 C or over 60 C,might cause permanent damage to the product.Maintain and Sending Conditions:Temperature: -25 C to +70 C(-13 F to +158 F) Humidity: Volume and Weight:Volume(L*W*H): 135mm*108mm*36mm(5.31*4.25*1.42) NW: 230g(0.43lb) . Standard:Security : EN60601-1,Type BF Electromagnetic Compatibility: EN60601-1-2Fit for different brand digital hearing aidsPackage Content: 1 x USB CABLE 1 x Installation CD (Driver software) 1 x Instruction manual (English)Sample: Available Delivery within 3 daysWarranty:Delivery:We send the products by sea or by air accroding to the demand of customers

USBasp Programmer Inclusive of courier charges

Features Used for most common key and lock programming tasksSuitable for programming keys and locks inside the office General Specifications Reinforced ABS, UV proofIP55, RoHSPowered by USBAES 128-bit encryptionCompatible with Windows 73 LED display

AVR USB Programmer with high speed USB 2.0 Compatible with all AVR development board.Easy to interface to PC for Flash and EPROM Programming which also supports Fuses and Lock bit Programmming.supports all operating system.