Cement Testing Services
Price On RequestTest Report Required: 3 to 7 Days
Certification Service: ISO
Cement testing through Chemical analysis ,Compressive strength, Fineness, Heat of Hydration, Setting Time and more through various IS tests :-
Chemical Analysis
Chemical analysis of hardened concrete can provide a wealth of information about the mix constituents and possible causes of deterioration. Standard methods can be used to find the cement content and original water/cement ratio, but many other properties can also be established; Cement Content and Aggregate Cement Ratio, Cement Content and Pulverised fuel ash/fly ash (pfa) content, Cement Content and Slag content, Water/Cement Ratio, Aggregate Grading, Determination of the presence of High-Alumina Cement (HAC).
Compressive Strength
The most common strength test, compressive strength, is carried out on a 50 mm (2-inch) cement mortar test specimen. The test specimen is subjected to a compressive load (usually from a hydraulic machine) until failure.
Fineness
The fineness of cement has an important bearing on the rate of hydration and hence on the rate of gain of strength and also on the rate of evolution of heat. Greater fineness increases the surface available for hydration, causing greater early strength and more rapid generation of heat. Cement fineness play a major role in controlling concrete properties. Fineness of cement affects the place ability, workability, and water content of a concrete mixture much like the amount of cement used in concrete does.
Loss On Ignition
The loss on ignition is reported as part of an elemental or oxide analysis of a mineral. The volatile materials lost usually consist of "combined water" (hydrates and labile hydroxy-compounds) and carbon dioxide from carbonates. It may be used as a quality test, commonly carried out for minerals such as iron ore. For example, the loss on ignition of a fly ash consists of contaminant unburnt fuel.
Setting Time
Initial setting time is the time that elapsed from the instance of adding water until the paste ceases to behave as fluid or plastic. Whereas final setting time referred to the required for the cement paste to reach certain state of hardness to sustain some load.
Soundness
Soundness refers to the ability of a hardened cement paste to retain its volume after setting. Lack of soundness is observed in the cement samples containing excessive amount of hard burnt free lime or magnesia.