Master Controller in Pune (मास्टर नियंत्रक, पुणे)

Master Controller is housed in an enclosure and provided with an easily removable cover with ample area for maintenance. The cam shaft is mounted on bearing bushes on the walls of the housing. They are made of delrin material and fixed on square spindle switch which are moved by a handle. The cams are cut according to the switching program.

The master-controller which wirelessly sends commands to other devices.

MC-BFC series timers are commonly known as Master Controllers. These are specially designed to control the cleaning sequence of multiple compartment bag house in ON LINE as well as OFF LINE mode. MC-BFC consists of Master Controller Timer, Interface Card & set of Slave Timers. MC-BFC is fully programmable.This Timer is proposed when the number of pulse valves per compartment are more. The Timer is suitable for 2 to 16 compartments and pulse valve outputs upto 3296. Maximum Pulse Valve outputs for 1 compartment are 206.

Master Module

Crane Controller

Master Controller

Smaller than most cell phones, controls all smart device switches and IP Cameras from anywhere in the world.

Master Control

Pyramid is a hub where algorithm accepts the request from the app to perform action on that request and send data back to router.

digital master control

Master - Slave Controller

Master Control Unit (MCU)

The Master Air Control is an award winning solution from Forbes Marshall It won the CII Design Excellence Award for 2014-15. The Master Air Control(MAC) is an energy saving controller that helps maintain the balance between the demand and the supply sides. The Master Air Control caters to the continuously fluctuating demand from the user side by delivering a steady pressure. In doing so, it helps in reducing excess loading-unloading of compressors caused by the fluctuating demand and thereby reduces the energy consumed by the compressors.

For important installations like telecom / communication / defence / Lighthouse, where continuous power supply is required 24X7, only wind solar hybrid is not sufficient since in some days, neither wind power nor solar power is available to the extent that is required for supply of power for 24 hours. A wind solar diesel hybrid contains AC grid power and diesel power in tandem with wind solar hybrid and in any emergency, the alternative conventional power is injected in short burst to recharge battery and keep the power supply going. This is a perfect system for guaranteed power at remote locations. Wherever diesel generator is used for continuous power supply, it reduces out the diesel consumption by as much as 90%. The master controller is a composite wind, solar, battery, diesel, AC mains & load output control system all in one. It monitors all the wind power & solar power inputs to the battery, factors in the battery amphere hour efficiency & also monitors the battery output of the load to continuously monitor the battery state of charge. In case of low wind & solar power generation, the battery gets drained to a low state of charge. At a pre-specified low state of charge, the master controller signals for alternative battery charging source. If the mains power is available, it is selected for charging the battery but if mains power is not available, the master controller triggers the starting of connected diesel generator for charging the battery from alternative source. The master controller has a built-in heavy duty battery charger which is designed to recharge the battery within 2-3 hours for tubular flooded batteries (in case of VRLA/Gel batteries, the time taken will be more) .After the battery is recharged to a safe state of charge level, the master controller automatically shuts off the diesel generator or the mains power supply. This can also be programmed to provide equalizing charge to the battery at required intervals to keep it healthy & at high Ampere Hour efficiency.

master control unit

Master Slave Controller

Eot Crane Master Controller

Heavy Duty Master Controller