Adsorption Systems

The mixSorb L series provides unique capabilities to investigate arbitrarily complex dynamic sorption processes in a uniquely safe and easy-to-use bench-top instrument. Technical adsorbents such as zeolites, active carbons, silica gels, etc. can be investigated under authentic process conditions at a broad temperature (-20 C to 400 C) and pressure (up to 85 bar) range, with adjustable gas flow rates up to 40 L/min and well-defined gas compositions. Specifications/Features/Benefits Determination of breakthrough curves Investigation of kinetic performance of adsorbents Investigation of co-adsorption and displacement Determination of sorption selectivity Reasonable downscaling of technical separation Dynamic adsorption and desorption experiments Determination of single- and multi-component adsorption data In-situ sample preparation up to 400 C Fully automated control via PC Automated regulation of the adsorber pressure up to 10 bar Up to 4 high precision mass flow controllers Automated built-in gas mixing Measurement of inlet and outlet gas composition Pre-tempering of inlet gas and tempering of adsorber Monitoring of inlet gas temperature Determination of heat profiles in the adsorber with four temperature sensors Monitoring of pressure drop along the adsorber Built-in Thermo Conductivity Detector (TCD) Optional gas analysis via interfaced Mass Spectrometer Safety guard sensor for flammable gases for automatic shut down Enhanced Safety by intelligent illuminated workspace

CHARKOL BED COLUMN, MOC : MS, CAPACITY: 3000 LTR.We, "Vinayak Industries", established our presence in 1996 as Manufacturer and Exporter of a wide array of industrial machinery that is widely used in pharmaceutical and chemical industries. We are dealing wide range of Reaction Vessels, Jacket Reactor, Resin Plant, Heat Exchanger, Storage Tank, Blending Machines, Industrial Mixers, Industrial Stirrer, Distillation Columns, Reaction Kettles, Sigma Kneader, Distillation Units and many more.

we "Technical Teaching (D) Equipments" are the leading Manufacture of a wide range of Cam Analysis Test Rig, Epicyclic Gear Test Rig, Water Cooler Test Rig etc.

The set up consists of glass column packed with rasching rings, feed tank, CO2 cylinder with regulator, air regulator with pressure gauge, rotameter, receiving tray and piping. Metered quantity of fluid is distributed over the packing while metered gas and airflow is passed through the bed vertically upwards.The gas air mixture is absorbed in the liquid. All the flow rates can be independently varied to simulate different conditions and by measuring the concentration of gas absorbed in the liquid the overall volumetric mass transfer coefficients can be calculatedExperimentsDetermination of overall gas transfer coefficientFeaturesContinuous operationSuperb Painted structureSimple to operate & maintainCompact & stand alone set upStainless Steel tanks and wetted partsUtilities RequiredElectric supplyProvide 230 /- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for CompressorChemicals for trial Sodium Hydroxide (NaOH)- 40gm, Hydrochloric Acid (HCl) 1N- 500ml, Barium Chloride (BaCl2) - 100gm, Phenolphthalein indicator-10ml, Methyl orange indicator- 10ml (Or as per your choice)Compressed Air supply using a compressor: Clean, oil and moisture free air, pressure 5 Bar.Water Supply & Drain as required

Apparatus is commonly used for determining the process of adsorption in packed bed arrangement Due to the hassle free installation and simple construction, these apparatus is highly demanded in the market These are designed under the strict command of our quality analyzers keeping in mind the industry guidelines Utilities Required: Water Supply & Drain Electricity Supply: I Phase, 220VAC, 1.5kW Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted Specifications:- Product Adsorption Setup Reactor Column Material Borosil Glass, different diameter with different height of packing (3 Nos.) Feed Tank Material Stainless Steel, Capacity 20 Ltrs., feed lines, drain valve etc. (1Nos.) Receiving Tank Material Stainless Steel, Capacity 20 Ltrs (1Nos.) Feed Circulation By pump, Magnetic drive made of Polypropylene (1Nos.) Flow Measurement Rota-meter 1 Nos. (for feed) Feed Piping PVC / SS sizeStop Watch Electronic Control Panel On off switch, Mains Indicator etc.

The set up consist of three vertical column packed with activated Charcoal. Columns are operated individually. Liquid feed with dye is fed to the individual column from the bottom and samples are collected from the top at regular interval of time. Rota meter is provided to measure the flow rate. Pump with a feed tank is provided for fluid flow.

Odour Adsorption system is a system for control of odour at wastewater treatment facilities, scrubbing of hazardous industrial chemicals and control of particulate matter in industrial process air systems.

We feel proud to introduce ourselves as the well-known manufacturers, retailer and service provider of Adsorption System The offered noxious fumes gases adsorption system is specially designed to purify the air through adsorption mechanism. Our supplied noxious fumes gases adsorption system is available at very affordable market price. Features: Corrosion resistant Swiftly changes chemical media Low noise operation

Use the selective absorption characteristics of certain minerals under pressure. By using more than one absorbent they can not only separate oxygen and nitrogen but also carbon dioxide, as required, and ethylene continuously. Instead of purging it, the gas within the container envelope is processed, thus humidity control and raised levels of carbon dioxide are possible giving a fully controlled atmosphere. Systems tend to be more complicated and contain more components than membranes however the absorbents have to all intents an infinite life. There is a small selection of equipment currently available offering a variety of performance and operational features, for both CA and MA. For more information as to whether CA/MA is suitable for your cargoes please contact your local shipping line representative. Packaging: Packaging is a fundamental element in the transport of temperature controlled cargos. It is essential to protect cargos from damage and contamination. The correct design and highest quality of materials need to be used to ensure it can withstand the refrigeration process and transit. Where appropriate, packaging materials must be able to: Protect products from damage as a result of 'crushing'. Be able to withstand 'shocks' occurring in inter modal transport. Be shaped to fit on pallets or directly into the container for stowage. Prevent dehydration or reduce the water vapour transmission rate. Act as an oxygen barrier preventing oxidation. Withstand condensation and maintain its wet strength. Prevent odour transfer. Withstand temperatures of -30 degree C or colder. The wide variety of cargos, coupled with the design and quality requirements of packaging materials, listed above, are the reasons for many different packaging types and styles. Perishable fruits and vegetables require packaging that allows refrigerated air to circulate around the products to remove the gases and water vapour produced by their respiration. Often cargos are carried in cartons. These cartons must be capable of being stacked to the maximum height allowed in the container of approximately 2.5 mtrs (9 feet) in a hi-cube integral container, higher than most land based palletized operations. Many packaging types used for other forms of transport, for example for road haulage, may be inadequate for sea transport. Shippers are advised to thoroughly test their packaging to ensure it is suitable for transit by sea in a refrigerated container

Product Specification Brand TTE Frequency 50 HZ Phase 1 Power Source AC Voltage 230 Country of Origin Made in India Minimum Order Quantity 1 Unit Product Description.A three glass Column having different diameter and length will be made of Borosilicate Glass and Packed with activated Charcoal and operated individually.

We are successfully meeting the requirements of our clients by manufacturing the best quality range of Adsorption in Packed Bed Apparatus. Features: Minimum maintenancePrecisely engineeredLong working life

We offer the pressure swing adsorption system (PSA) based on Molecular Sieve Technology for dehydration of alcohol As per IS Specification. In Rectified spirit 94.68% alcohol and rest is water. Remaining water from rectified spirit cannot by distillation. In order to extract water from alcohol by following technology. Three bed Molecular sieve technology: wo bed Molecular sieve technology: Two/Three beds helps in order to make the process continuous. Active bed is under pressure carrying out dehydration, While At the same time regeneration bed is under vacuum. Control valves helps to shift of operation (swing) from first bed to second bed. ???Liquid sprit feed: In Stand-alone plant Rectified spirit are fed to Recovery column results vaporization of liquid. Regeneration purge Cycles used to the recover ethanol. To minimize the steam, Product vapors are used to preheat the liquid feed. ???Vapor sprit feed: This system is integrated with distillation where wet rectified vapors directly receive from the rectifier column. . The merits of an integrated system are lower energy Consumption. By using latent heat of the feed vapors the steam requirement of the dehydration is practically zero. Also reduces initial capital cost. Key Features: he life of molecular sieve may be around five to seven years. However Initial cost is low. The operating cost is also very low. The basic process is very simple, making it easy to automate which reduces Labour. There is no chemicals used, there are no material handling or liability problems, which might reduces workers. Molecular sieves can easily process ethanol-containing contaminants In integrated system, Steam consumption minimized by multi-stage preheating to permit substantial heat recovery and reuse. An advanced control system, developed through years of experience, to provide sustained, stable, automatic operation.

Owing to the rich experience and knowledge of this field, we have been able to offer optimum quality Adsorption in Packed Bed to our valuable customers. The offered apparatus is commonly used for determining the process of adsorption in packed bed arrangement. Due to the hassle free installation and simple construction, these apparatus is highly demanded in the market. Specifications: Product Adsorption SetupReactor Column Material Borosil Glass, different diameter with different height of packing (3 Nos.)Feed Tank Material Stainless Steel, Capacity 20 Ltrs., feed lines, drain valve etc. (1Nos.)Receiving Tank Material Stainless Steel, Capacity 20 Ltrs (1Nos.)Feed Circulation By pump, Magnetic drive made of Polypropylene (1Nos.)Flow Measurement Rota-meter 1 Nos. (for feed)Feed Piping PVC / SS sizeStop Watch ElectronicControl Panel On off switch, Mains Indicator etc.The setup is painted with good quality paints mounted on a strong support.