Bifenthrin

Bifenthrin 2.5% ECTermiticides for control of:Termites in buildings construction➤ Wood borer in wood➤ Other wood destroying pestsARBUDATERMI-SECURRecommended Dose:20 ml/1Ltr of water20 ml/1Ltr of diesel oilAntidote:No specific antidote is known.Treat symptomatically.Packing:100ml, 1 ltr., 5 ltr. 20 ltr.Direction of use:Pre-Construction: The chemical emulsion shall be applied uniformly at the prescribed rate in all the stages of treatment. Arbuda PCO sprayer or watering can be used for application of chemical emulsion.Treatment of Masonry Foundations:Bottom surface and sides of foundation pits upto a height of 30 cm should be treated 5 ltr. chemical emulsion per sq. mtr. of surface areaBack fill earth in immediate contact with the foundation structure should be treated @ 7.5 ltr. per sq. mir, of the vertical surface, of the substructure for each side.Treatment of RCC Foundations: Treatment should start at a depth of 50 cm below ground level @ 7.5 ltr. per sq, mtr.Treatment of Top surface of plinth filling: The top surface of the consolidatedearth within plinth walls shall be treated with chemical emulsion at the rate of 5 per sq. mtr. of the surface before the sand bed or sub-grade is laid. Itr. Soil treatment along external perimeter of building: Earth along the externalwalls of the building should be rodded at intervals of 15 cm and to a depth of 30 cm exposing the foundation wall surface. Chemical solution should be poured along the wall 7.5 ltr per sq.mtr. of vertical surface.Treatment of soil under apron along external perimeter of building: Top surface of the earth over which the apron is to be laid shall be treated with chemical solution @ 5 itr. per sq. mtr. of the vertical surface.Post Construction:Soil treatment along external perimeter of building: Earth along the externalwalls of the building should be rodded at intervals of 15 cm and to a depth of 30 cm exposing the foundation wall surface. Chemical solution should be poured along the wall @ 7.5 ltr. per sq. mtr. of vertical surface.➤ Treatment of soil under apron along external perimeter of building: Top surface of the earth over which the apron is to be laid shall be treated with chemical solution@5ltr. per sq. mitr. of the vertical surface.➤ Treatment of soil under floor: To prevent entry of termites from cracks, soil under floor should be treated. Drill 12 mm holes at the junction of floor and wall at 30 cm interval to reach the soil below. Squirt the chemical solution @ 1 ltr. per hole and seal. Treatment of voids in masonry: The movement of termites through masonry walls may be restricted by drilling holes in masonry wall at about 45" angle preferably from both sides of the plinth wall at 30 cm interval and squirt the chemical in holes till refusal and seal the holes. Treatment of Upper Floors: In case of infestation in upper floors, treat ground floor of the existing building as described above.Recommendation for control of wood borer (Powder post beetle) in Plywood, veneer and wood:1) Apply 400 ml formulation per cubic mtr. of wood as glue line poisoning.Mix 1 Itr. of formulation in 99 ltr. of water to make 0.025% solution and applied by dipping method.Veneer: Mix 1 Itt of formulation in 99 Itr. of water to make 0.025% solution and applied by dipping method.Wood: Mix 1 ltr. of formulation in 99 ltr. of water to make 0.025% solution and applied by dipping/brushing method.