Block Jointing Mortar

SUN BLOCK ADHESIVE Product Description:- Sun blockAdhesive is a non-refractory mortar, used for laying masonry units like AAC blocks. It is a self-curing mortar made from cement, selected fine sand and polymeric additives, which ensure good bonding and durable strength between the blocks. Key Features Self-curing mortar does not require post curing on.Consumption For 4mm bed thickness coverage is 7 - 7.5 kg/sqm. The coverage will vary depending on surface conditions and undulation in blocks. Shelf Life 12 months from the date of manufacturing in a sealed condition. Store in a cool dry place. blocks fixed with Sun block Adhesive. Ready to mix - water to be added at site as per the mixing ratio. Long potlife reduces the wastage at site, at same time large quantity of material can be mixed. Good bonding between the blocks and cementitious surface. Easy to apply. Economical in use. Consistent quality material. Able to withstand hammering, electrical conduting, chiseling and framing done at construction site as per standard masonry practice. Wall construction speed - Full wall 2-3 days depending upon the adhesive thickness Recommendation It is recommended for fixing AAC, CLC, hollow, concrete blocks & bricks.Mixing Gradually add 2.5 parts of powder to 1 part of water (by volume) and mix it for 5-10 minutes to achieve smooth paste consistency. Attempt to be made to break the lump during mixing so that maximum dispersion of polymer takes place in the mortar resulting into good bonding strength with the blocks. After mixing allow the paste to stand for 2 - 3 minutes to mature and again mix it for paste consistency. Do not attempt to extend the pot life by adding more water to the mixed adhesive. Application Methodology Put well mixed weber blokfix on the block with help of trowel, spread mortar uniformly on the unit. Apply notch trowel on the mortar and firmly place the block with slight shear to ensure good transfer & bonding. Sun block Adhesive to be applied on the faces of the block and on column and beam, material to be applied on both i.e surfaces as well as on block to ensure good bonding at the joints. Use rubber hammer to have good contact between the blocks. Go on placing the blocks with above method and erect the wall. Pack Size: 30 kg Note Minimum thickness to be applied is 4mm to take care of the undulation in the blocks as well as to ensure minimum 90% transfer leading to good bonding strength. Notch trowel to be used for the application of Sun block Adhesive Plastering can be done at construction site as per standard masonry practice generally after 7 days, conduting and chiseling can be done generally after 14 days. Material used for packing on the outer block surface is of lower thickness. Rubbing on applied thin thickness may cause powdering. Consumption For 4mm bed thickness coverage is 7 - 7.5 kg/sqm. The coverage will vary depending on surface conditions and undulation in blocks. Shelf Life 12 months from the date of manufacturing in a sealed condition. Store in a cool dry place.

Since 2012, OTTAWA CERAMIC is committed to deliver the quality approved, attractive and flawless tiles. We commenced as a sole proprietorship entity at Shakti Chamber 1, Morbi, Gujarat and from there we ensure to keep in check with all the occupation course of actions. We are engrossed in manufacturing of Kitchen Wall Tile, Wall Tile, Floor Tile and many more. Offered range of tiles is hugely applauded amongst clients due to its seamless finish, variety of patterns and impeccable quality.