Bus Coupler For Coupling

BK1120 | EtherCAT Bus Coupler for standard Bus Terminals Technical dataBK1120Number of Bus Terminals64 (255 with K-bus extension)Max. number of bytes fieldbus1024 byte input and 1024 byte outputConfiguration possibilityvia KS2000 or EtherCAT (ADS)Data transfer rates100 Mbit/sBus interface2 x RJ45Data transfer mediumEthernet/EtherCAT Cat.5 cablePower supply24 V DC (-15 %/+20 %)Input current70 mA + (total K-bus current)/4, 500 mA max.Starting currentapprox. 2.5 x continuous currentRecommended fuse 10 ACurrent supply K-bus1750 mAPower contactsmax. 24 V DC/max. 10 AElectrical isolation500 V (power contact/supply voltage/Ethernet)Distance between stations100 m (100BASE-TX)

Beckhoff EP 1008-0001 Overview Type: Digital Input Module Series: EtherCAT Product Line: EP (EPC - EtherCAT P) The EP 1008-0001 is an EtherCAT P (EP) module designed to provide digital inputs for industrial automation systems, specifically for use with EtherCAT P systems. The key feature of the EtherCAT P series is that it combines power and communication on a single Ethernet cable, which simplifies wiring and installation. Key Features of the EP 1008-0001 Digital Inputs: The EP 1008-0001 module provides 8 digital inputs. It is commonly used for tasks such as monitoring limit switches, sensors, or other digital devices. Input Type: Voltage Level: The inputs typically work with 24V DC signals, which is standard for industrial automation systems. Input Voltage Range: Usually, it accepts 24V DC, though the exact voltage range should be confirmed from the datasheet. Input Type: Typically, the inputs are sourcing (PNP) or sinking (NPN), depending on how the sensors are wired. EtherCAT P: The module operates over EtherCAT P (EtherCAT Power), which is an enhancement of EtherCAT that integrates power and data communication on a single cable. EtherCAT P is suitable for time-sensitive applications where high-speed data communication and minimal latency are critical. Connection: The module is designed for direct mounting on a DIN rail. It uses screw terminal connectors for easy wiring to the system. Compact and Rugged: Designed for use in harsh industrial environments with compact and rugged housing. Often mounted in a control panel or distributed I/O system. Status Indicators: LED Indicators for each input to show the status of the input (ON/OFF). Bus status: LEDs to show communication health. Configuration: Can be easily integrated with Beckhoff's TwinCAT software for configuration and operation, which is used for programming and monitoring of the automation system. Compatible with other Beckhoff devices for building modular and scalable control systems. Typical Applications for EP 1008-0001 Industrial Automation: Used in systems where there s a need to monitor digital signals, such as limit switches or simple sensors. Embedded Systems: Can be used in embedded control systems that require real-time data exchange over EtherCAT networks. Motion Control: Integrated in motion control applications, where digital inputs are required for feedback or enabling/disabling processes. Remote I/O: The EtherCAT P technology makes it suitable for applications that require distributed I/O systems over long distances with reduced wiring complexity. General Specifications While I don't have the precise datasheet for this model, here are typical specifications for such modules: Input Voltage: 24 V DC Digital Input Signal Level: 24V DC (Sourcing or sinking) Number of Inputs: 8 EtherCAT P Communication DIN Rail Mountable Bus Termination: Typically, there will be a bus termination option for extending the EtherCAT P network. Dimensions: Compact size (likely around 12 mm x 100 mm x 70 mm)

Make : BECKHOFF Model No. : BC5150 Type : Compact Bus Terminal Controller Country of Origin : GERMANYBeckhoff Automation Gmbh Material : Fiber Body Colour : Off white

The EK1100 has two RJ45 sockets. The upper Ethernet interface is used to connect the coupler to the network; the lower socket serves for the optional connection of further EtherCAT devices in the same segment. In addition, an EtherCAT junction or an EtherCAT extension can be used for the extension or for setting up a line or star topology. The system and field supply, each 24 V DC, is provided directly at the coupler. The attached EtherCAT Terminals are supplied with the current required for communication from the supplied system voltage. The coupler can supply a maximum of 5 V and 2 A. If higher current is required, power feed terminals such as the EL9410 have to be integrated. The field supply is forwarded to the individual I/O components via the power contacts with up to 10 A. In the EtherCAT network, the EK1100 can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) except directly at the switch. The EK9000 and EK1000 couplers are suitable for use at the switch.

ETHERCAT COUPLER, E-BUS TERMINAL, RJ45 CONNECTION, 24 VDC, MAX 4.2 GB ADDRESSABLE I/O POINT, -25 TO +60 DEGREES C, IP20.