Chassis Dynamometers

The 5000 series is the world's most affordable chassis dynamometer. But don't let its price fool you; the 5000 Series dynamometer is capable of supporting speeds up to 175+ MPH and 1250+ HP. The maximum axle weight is 6,500 lbs and the track width range is 36"-86". The 5000 was designed for a variety of different testing scenarios FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV s. With the stainless steel coverings and zinc plated knurled rollers this dyno is equipped to handle all of your companies needs. Ideal for portability when equipped with the caster/dolly kit. Standard with Integrated LED Lighting, patent pending taper shaft design for the highest load and torque. Integrated cooling fan for Frenelsa eddybrake which increases load testing time. It is equipped with a Frenesla eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you've made to the engine's fuel or timing maps. Diagnose engine and drivetrain problems. Troubleshoot drivability issues. Run track mile or circle track lap simulations with reaction times that you determine in the software parameters. Bi-Directional roller for testing of both RWD and FWD vehicles. The 5000 Series is fully upgradeable in the field, it can be coupled with any other Dynocom Chassis Dynamometer (7500, 15,000, or DC POD s) for All-Wheel-Drive Testing. PRICE INCLUDES: Chassis Dynamometer with frenesla eddy brake Dynocompute software w/manual2 x safety stabilizer rollers (2)integrated cooling fan for FRENELSA eddy brake/2k load cellintegrated led lighting Dynocom DC-Controller w/ 4 differential analog inputsDC-JBox For I/O, AWD and eddy brake upgrades DC-Handheld digital backlit LCD hardwired handheld for failsafe operationAtmospheric module ( humidity, barometric pressure and temperature )Wideband air/fuel with NTK 02 Sensor for leaded, unleaded and alcohol testingOptical pickup with Magnetic Base 2 chock blocks, 4 axle straps, 6 ratchet tie down strapsLifetime free technical support Two Years free software updatesTraining at our Fort Worth, Texas Location 2 x Dynocom Racing ShirtsDynocom Shop Banner One Year warranty on all mechanicals (REPLACEMENT PARTS)

To understand concept and development criteria of Electric Vehicles, Mine Instruments Pvt. Ltd. designed an industrial grade test platform for learner. This Test platform is very helpful to determine parameters used in design of an electric vehicle. This project is aimed to develop a chassis dynamometer (dyno system) that can be used to measure mechanical power, speed and torque, and provide a controllable load to the being tested. The prototype of chassis dynamometer for electric motorcycle had been developed and performance of the chassis dynamometer was tested using a two wheeler to emulate the basic performance requirements of a two wheeler which consist of torque, speed, engine rpm etc.

Product Application This machine is formed by two different diameter rollers and follows specification to install jump plates at bike s seat post, pedals, bars, luggage carries, with load set to this tester. Adjust the distance between front and rear wheel base on the standard for complete cycles, constantly rotate the wheel by 7-27km/hr so that the bike is supposed to maintain its normal function, and no part damage or crack is found. For brake test, follow the specification specified roller s friction coefficient, wind speed and water-spray amount of loaded brake holding handle to test the performance and judge bike's performance under the defined frequency. Specification Torque sensor capacity 0-100N.M Force sensor 200kg 50kg The machine drive speed 0-40 km/Hr adjustable The brake force control closed-loop control Data collection system The NI acquisition card Main motor Adopts frequency conversion motor Weight 400KG Power AC220V,15A AdvantagesIntegrated Machine includes Road Dynamic Test and Brake Performance Test.The machine can do tests under both Dry and Wet conditions, which can simulateactual environment.It can meet international standards EN 14781, EN 14764, EN14765, especially latest standard ISO 4210.

Our engine dynamometers help you verify that the repair is completed, that the engine is operating according to specifications and can be used to break-in engines before installation. Our engine dynamometer product line includes hydraulic dynos, portable dynamometers, eddy current dynos, and AC dynos.

We are the first to launch and prove the indigenous Regenerative Vehicle Chassis Dynamometer, Regenerative DC Dynamometer for engines / other prime mover testing in India. Following are the important features of this Dyno: Real Time Digital architecture for PID control and Data Acquisition Digital Calibration for acquired parameters Bump Less transfer modes High Dynamic Digital Communication between distributed IO devices and Controller, PC SCADA Industry Standard Protocols; ODBC, TCP/IP, MODBUS, AK, ACSII, CAN, PROFIBUS, SERCOS, ASAP-3, K-Line, Digital IO. Analog IO Adjustable Wheel base to accommodate different vehicle models. Application Area R D, QA , Production (End-of-line), Showrooms, Garages etc. Track width: As per vehicle requirement +/- 250 mm Wheel base: As Per vehicle requirement +/- 250 mm Inertia simulation range (GVW): 2 Wheeler : 90 Kg to 300 Kg 3 Wheeler : 750 Kg to 1500 Kg 4 Wheeler : 1000 Kg to 4500 Kg Maximum Speed: Up to 200 Kmph ECU / VCU Integration Synchronised Vehicle Cooling Blower, Exhaust Blower Controls and Integration

Chassis Dynamometers

Highly accurate. Consistent performance. High degree of operation. Reliability and Repeatability and Low Frictional Losses. Windows-based drivers aided software.

Our engine dynamometers help you verify that the repair is completed, that the engine is operating according to specifications and can be used to break-in engines before installation. Our engine dynamometer product line includes hydraulic dynos, portable dynamometers, eddy current dynos, and AC dynos.

This system is intended to simulate automobile driving conditions, and to test power performance, emissions analysis, NVH, environment resistance, durability and EMC. The engine cooling fan, robot driver, drivers-aid, and fixing equipment, etc., included. We are manufacturing the system for various applications. For radio-frequency anechoic chambers, we provide test systems with reduced electromagnetic radiation for EMI and also EMS. The system also tests the high/low-temperature anechoic chambers.

The 4 4 chassis dyno at NATRAX is from M/s AVL systems. Also known as rolling road, the chassis dyno is capable of real road load conditions on test vehicles. The dyno can accommodate vehicles upto 4,500 kg. The dyno can test vehicles with 2WD and 4WD capability and front/ rear wheel driven vehicles.

2-wheeler Emmission chassis Dynamometers

Motorcycle Chassis Dynamometer

Chassis Dynamometer

VULCAN Series Chassis Dynamometer

Chassis Dyno (120 KW)