Current Limiting and Changeover Devices

CURRENT LIMITER,XTPAXCL,MADE IN GERMANY

Auto Source Changeover cum current limiter Auto DIGITAL MICROCONTROLLER BASED AUTOMATIC SOURCE CHANGEOVER CUM / WITH CURRENT LIMITER (ACCL) Source Changeover cum current limiter

Current Limiting and Changeover Devices

Intro ACCL is used for efficient distribution of generator power in high rise apartments, townships, commercial buildings, etc without overloading the generator. Detailed Description The ACCL will switch the load to generator supply during failure of mains supply. It also acts as a current limiter when load on generator exceeds the pre-set limit thus avoiding any overload on the generator. Specifications 01 Unique - patented design - Contactor based ACCL 02 Heavy Duty - AC 32A and AC22A utilization category 03 Long life - 25000 operations 04 Safe - 5 kA short circuit capacity Tested at Third party lab 05 Energy efficient - Low Power consumption as coil operates only during DG 06 Cool - Low Temp rise as power consumed is less than 0.2VA on EB 07 User friendly - even during overload, load will be On for 10 sec so that user gets some time to switch off unwanted loads. Beep LED indication. 08 Proven - Tested at third party (UL LAB) 09 Technically sound - Break before make due to higher air gap 10 Convenient - Auto Reset Facility 11 Versatile - Can be used in new buildings as well as for retrofitting (i.e 2 Sub main or 1 Sub main wiring method)

Due to our honest business standards and transparent deals, we are steadily making our way to the platform of success by manufacturing Current Limiting Device. Features: Compact designFlawless finish High performance

Made in France 200 pc available

OMRON K2CS-M20A Function: Limits overload current to protect equipment and ensure electrical safety in control panels and automation systems.Current Rating: Rated for a nominal current of 20 A.Frequency: Operates on electrical systems with a frequency of 50/60 Hz.Response Time: Features a quick response time of 5 seconds.Adjustable Sensitivity: Offers an adjustable sensitivity range, typically specified as 4 10 times the current rating (4-10 x 1A or 4-10 x 0.25A depending on the specific sub-variant).Application: Ideal for industrial automation and marine automation contexts where current control and overload protection are crucial for sensitive components.Brand/Manufacture: Made in Japan by the Omron Corporation

AVR made ASCL is a fully automatic high precision micro-controller based system ideally suited for Conservation of Energy of Standby Generators used in Multi-storied Apartments, Commercial Complexes, industrial Establishments, etc. Generally, the Standby Generators are selected to meet the demands of critical and essential loads of consumers and hence the Ratings of the Generators are lower than the connected Power from the Mains Supply System. It is, therefore, necessary to stagger the connections the connections and Monitor the power drawn by each consumer, so that the Generator does not get overloaded. The ASCL has been specially developed to meer this requirement and has the following Features and Functions. Features: Micro- Controller based design Automatic Source Change Over Break before make change-over system Neutral isolation for all models Current Limiting function Counter for number of interruptions, thereby protecting your valuable equipment Prevents over loading of the Generator LED indication of Status Saving in wiring and wall space Energy Saving..Reduction of Co 2 Emission Other Versions: Automatic Current Limiter(ACL) This provides ideal solution for limiting the load with in a preset value and thus reduce the Maximum Demand and Saves energy as well as Cost. It permits the consumer to Switch-On the load up to rated current continuously. If the current exceeds the pre-set value, it disconnects the load for about 15 seconds, during which the consumer is expected to reduce the load to within the Pre-Set Limit. In an unlikely event of consumer not reducing the load within 5 cycles of operation, the supply to the consumer is disconnected, until it is REST. Thus, the unit saves considerable energy, ensures that the Maximum. Demand is not exceeded and also protects the equipment against overloading. Automatic Source Change Over Unit (ASC) In some applications like lighting of corridors, lifts, water pumps etc,. Customer would like to give full power from either Mains or Stand by Gensets. In such cases, only Auto Source Change Over (ASC) unit without a Current Limiting Feature can be used.

An Automatic Changeover with Current Limiter is an electrical device that automatically switches the power supply from the main source to a backup source (like a generator) during a power failure. The built-in current limiter protects the connected equipment by restricting excessive current, preventing damage from overloads. This system ensures uninterrupted power supply while maintaining safety for appliances and circuits.

Current Limiting and Changeover Devices

Current Limiting and Changeover Devices

HYUNDAI AOR-1S-AS OVER-CURRENT TRIPMODEL: AOR-1A-ASTYPE: OVER CURRENT TRIPBASE CURRENT I O: 600ACT RATING I CT: 630/5ARATED FREQUENCY: 50-60 Hz