Direction Sensor

Dynalab sensor model DLSD 8701 is a 3 cup Anemometer and Wind vane Built in to a single unit for convenience and lower cost at the same time not compromising on quality and accuracy. Specifications: Wind Direction:Sensor : Wind vane coupled to a Linear endless PotentiometerRange : 0 to 359 degrees from NorthAccuracy : + 3 degrees.Linearity : With in the accuracy limitOutput : 0 to 5 K ohms resistance corresponding to the range0ption of 0 to 1 Volt or 0 to 2.5 Volt for the rangePower input : 5 to 12 Volt depending on the users requirement.Termination : On a 4/5pin MS connector( including Anemometer )Wind Speed:Sensor : 3 cup rotor coupled to a chopper and IR emitter/detector circuit.Range : Wind speed 0 to 60 Meters /secAccuracy : + 2% of full scaleStarting Threshold : 0.3 Meters /secLinearity : With in the accuracy limits.Output : TTL level pulses frequency proportional to W .Speed. Approx. 15 Hz/ Mtr/sec Option Voltage output 0 - 1 V or 0 2.5V for 0 to 60 Meters /secConstruction Body : ABS plasticRotor cup assembly : ABS plasticRotor Shaft : Stainless steelBearings : Sealed 623Z bearingsWind vane : ABS plastic and plated brassPotentiometer : Sealed long lifeClamping support : Powder coated AluminumOutput Connector : 5 pin MS ConnectorOrdering Information :Dynalab Combined Speed /Direction Sensor Model DLWD 8701

Features Hall-effect geartooth speed and direction sensor with flange-mount plastic housing. Sense speed and direction of ferrous geartooth targets Sense speed and direction of ferrous geartooth targets Near zero speed sensing capability Capable of 8000+Hz target speed Locating mark provided to assure correct rotational alignment 10-bit dynamic threshold detection offers: South Pole Sensitive (except MP100105 and MP100106) M12 Integral Connector Meets IEC 60947-5-2 Internal circuit protection allows sensor to meet all IEC requirements for Heavy Industrial Environments,ensuring immunity from: Automatically adjusting magnetic range Self-compensating to target geometry Immune to target run out Compatible with unregulated power supply Reverse battery protected to -30VDC Internal circuit protection to IEC529 1000 EMI resistant to 10V/m, 30MHz to 1GHz ESD resistant to 4kV (Contact discharge) Fast transient resistant to 2kV Conducted immunity resistant to 10VRMS@150kHz to 80MHz EMC compatible 30A/m @ 50 Hz Meets IEC529 IP67 for dust and water protection Integral Connector version: 4-pin Delphi Metri Pack 150.2 No. 12162833. Mates with Terminal No. 12124075. Discrete wire version: 20 AWG, PVC insulation, UL1007/1569

Features: Perfect finishLess maintenanceQuality product

Speed And Direction Sensor

Hall-effect geartooth speed and direction sensor with flange-mount plastic housing. Sense speed and direction of ferrous geartooth targets Sense speed and direction of ferrous geartooth targets Near zero speed sensing capability Capable of 8000+Hz target speed Locating mark provided to assure correct rotational alignment 10-bit dynamic threshold detection offers: South Pole Sensitive (except MP100105 and MP100106) M12 Integral Connector Meets IEC 60947-5-2 Internal circuit protection allows sensor to meet all IEC requirements for Heavy Industrial Environments,ensuring immunity from: Automatically adjusting magnetic range Self-compensating to target geometry Immune to target run out Compatible with unregulated power supply Reverse battery protected to -30VDC Internal circuit protection to IEC529 1000 EMI resistant to 10V/m, 30MHz to 1GHz ESD resistant to 4kV (Contact discharge) Fast transient resistant to 2kV Conducted immunity resistant to 10VRMS@150kHz to 80MHz EMC compatible 30A/m @ 50 Hz Meets IEC529 IP67 for dust and water protection Integral Connector version: 4-pin Delphi Metri Pack 150.2 No. 12162833. Mates with Terminal No. 12124075. Discrete wire version: 20 AWG, PVC insulation, UL1007/1569

Speed and direction sensor

the kds-131 anemometer includes both wind speed and wind direction sensors. Rugged components stand up to hurricane-force winds, yet are sensitive to a light breeze. It includes sealed stainless-steel bearings for long life. The range and accuracy specifications of this unit have been verified in wind-tunnel tests (information available upon request). a model kds-131 anemometer reported wind speeds of 175 miles per hour before its tower collapsed during hurricane andrew, 1992. Digital filtering, with time constant as specified below, is applied to wind direction measurements. in areas where icing of the anemometer is a problem, use anemometer drip rings to deflect water from the joint between moving parts.

SPEED & DIRECTION SENSOR