Ductility Tests

We are engaged in offering Ductility Test Service to our clients. Our range of all products is widely appreciated by our clients.

The apparatus for the standard ductility test as per IS 1208 - 1978 consists, of the following Briquette should , made up of brass, The Mould when properly assembled from Briquette specimen of dimension Total length=75.0-0.5mm,Distance between clips=( 30.0 + 0.3mm width at mouth of the clip=(20.0+0.2mm)width at minimum cross section=10.0+01mm half way between clip thickness throughout =10.0+0.1mm water bath a bath maintained with +0.10C of the Specified Test Temperature containing not less than 10 liters of water the specimen being submerged to a depth of not less than 10cm and supported on a performed self and less than 5cm from the bottom of the bath testing Machine For pulling the briquette of bituminous material a part horizontally at a uniform speed of 50+2.5mm per minute thermometer range 0-440C Readable Up TO 0.20 C.

Comprehending the varied desires of our clients, we are instrumental in presenting a comprehensive range of Ductility Testing.

Due to our devoted vendors, we have been accomplished to offer an extensive range of Ductility Testing. Our presented products are processed as per customer s demand.

Testing

Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. The entire assembly is mounted with a stainless steel lined water bath completely encased in metal bound hardwood. It is equipped with an electric pump circulator and heater. The temperature is controlled thermostatically. Two rates of travel i.e. 5 cm/min and 1 cm/min are provided. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply.COMPLETE WITH:Ductility Mould , with Base Plate 3 Nos. Thermometer IP 38 C, Range: 23o C to 27o C

Aluminum is easy to process, no matter what method is used (milling, drilling, shearing, forging or spinning). It is easy to shape, making it ideal for extruding, strip rolling, bending or other plastic hot or cold fabrication methods. It can also be soldered and glued.

Increased Ductility

Ductility Tests

Ductility Tests

Ductility Test

Ductile

Ductile

Ductility Tests

Ductile