Dust Sensor

A PM2.5 air quality sensor detects the concentration of fine inhalable particulate matter (PM2.5) in the air, which is 2.5 micrometers in diameter or smaller. These sensors typically use the laser scattering principle to work: a laser shines on the air, particles scatter the light, and a detector collects and processes the scattered light to determine the number and size of particles. The sensor then calculates the concentration of PM2.5, often reporting it in micrograms per cubic meter ( g/m ).

Power Voltage: 5-7V; Operating Current: 20mA (max) Detecting Value of Minimum Particle: 0.8 m; Sensitivity: 0.5V/(0.1mg/m3); Voltage of Cleaning Air: 0.9V(typical) Working Temperature: -10℃ to 65 ℃; Storage Temperature: -20℃~80℃; Life time: 5 Years Contact us for sample code and library Data compared to air quality: 3000 + = Very Bad; 1050-3000 = Bad; 300-1050 = Ordinary ;150-300 = Good ;75-150 = Very Good; 0-75 = Tiptop

The dust sensor detects fine particles as small as 1 m and measures quantity of floating particles in a room space up to maximum 30m3. The sensor generates forced inflow of the sampling air, and measures the dispersion of reflected light by particles. This measurement is then converted to PWM output signal. The sensor is capable of detecting particles as small as 1 m size particles including house dust, pollen, mite, germ, and cigarette smoke that are known causes for respiratory disease and allergy. It is an ideal and cost efficient solution for automatic control of air conditioner and air cleaner as well as monitoring indoor air quality.

Optical Dust Sensor with Cable This PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor is an infrared emitting diode (IRED) and a phototransistor is diagonally arranged into this device. It detects the reflected light of dust in the air. Especially, it is effective to detect very fine particles like cigarette smoke. In addition, it can distinguish smoke from house dust by the pulse pattern of the output voltage. The module is mainly used for dust removal equipment alarm equipment, air purification equipment, dust robots, fire alarm, etc. industry equipment can detect smoke particles, pollen spores, and other particles. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3. Applications: Detecting dust in the air.  Air purifier, Air conditioner, the Air monitor. Fire alarm Dust robots Package Includes:  1 x Optical Dust Sensor Specifications Sensor  Optical Dust Sensor Power supply voltage DC5 ± 2V Sensitivity 0.5V / (0.1mg / m3) Dimensions 5 x 4 x 3cms  Weight  25 grams

D2d sensor auto on off light in day and night Akshay Solar Technology is a company specializing in the development, production, and installation of solar energy solutions. Focused on renewable energy, it provides a range of solar products, including solar panels, inverters, and battery storage systems, designed to harness solar power efficiently. The company aims to promote sustainability by offering eco-friendly and cost-effective alternatives to traditional energy sources. Akshay Solar Technology caters to both residential and commercial sectors, providing customized solar solutions to meet specific energy needs. Their commitment to innovation and environmental responsibility makes them a key player in the growing solar industry.

GP2Y1010AU0F Module is used to Sense Dust Particles in air and also called as an optical air quality sensor. It is very much Smaller in size. It detects the reflected light of dust in air. Especially, it is effective to detect very fine particle like the cigarette smoke. In addition it can distinguish smoke from house dust by pulse pattern of output voltage and is commonly used in air purifier systems. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3. Features: Low consumption current (Icc: MAX. 20 mA) The presence of dust can be detected. Photometry of only one pulse Enable to distinguish smoke from house dust Lead-free and RoHS directive compliant

Auto Botix Dust Sensor is a high-sensitivity optical air quality module designed to detect dust, smoke, and fine airborne particles in real time. Built around proven light-scattering technology, this sensor is ideal for Arduino, ESP32, NodeMCU, Raspberry Pi, and other embedded systems used in environmental monitoring and smart automation projects. The module works by emitting infrared light inside a sensing chamber and measuring the light scattered by dust particles present in the air. The amount of scattered light is converted into an analog voltage output proportional to the dust concentration, enabling accurate air-quality analysis. Perfect for students, hobbyists, and industrial developers, the Auto Botix Dust Sensor provides a compact and energy-efficient solution for building indoor air quality monitors, pollution detectors, and smart home systems. ⭐ Key Features 🌫 High Sensitivity Dust Detection Detects fine particles including smoke 🔬 Optical Light-Scattering Technology Reliable and accurate measurement 📊 Analog Voltage Output Easy interfacing with microcontrollers ⚡ Low Power Consumption Suitable for continuous monitoring 🧩 Compact Module Design Simple integration into projects 🤖 Microcontroller Compatible Works with Arduino, ESP32, Raspberry Pi 🚀 Fast Response Time Near real-time dust monitoring 🧠 Working Principle Inside the Auto Botix Dust Sensor: An infrared LED emits light into the air chamber. Dust particles passing through scatter the light. A phototransistor/photodiode detects the scattered light. The module outputs an analog voltage proportional to dust density. This optical method allows detection of very fine particles such as cigarette smoke and household dust. 🔌 Typical Pin Configuration PinNameDescription VCC Power 5V supply GND Ground Ground LED LED Control Drives internal IR LED VO Analog Out Dust density output (Pin names may vary slightly by board version.) 📊 Technical Specifications Operating Voltage: 4.5V 5.5V DC Operating Current: up to 20 mA Output Type: Analog voltage Sensitivity: ~0.5 V per 100 g/m Minimum Detectable Particle: 0.5 m Dust Density Range: up to ~580 g/m Response Time: 1 second Operating Temperature: 10 C to +65 C Typical Size: ~46 30 18 mm These characteristics make it suitable for low-power air monitoring systems. 🚀 Applications Auto Botix Dust Sensor is widely used in: 🏠 Indoor air quality monitoring 🌆 Pollution measurement projects 🤖 Smart home automation 🧪 Arduino and STEM experiments 🌀 Air purifier feedback systems 🚨 Smoke detection prototypes 🏭 Industrial dust monitoring 📦 Package Includes 1 Auto Botix Dust Sensor Module (Resistor/capacitor or cable may be included depending on batch)

Established in the year of we, 'New Silikon Electronics', are well-acknowledged as one of the best Wholesaler Trader of Robotic Kits, Raspberry Pi, Pmdc Motor, Microcontroller, etc. Offered products are made by considering only quality approved materials given by the authentic vendors of the market. In their development process, we assure that only top notch material is used by our professionals along with ultra-modern tools and machinery. Owing to the features like high performance, durability, accuracy, and reliability, these products are widely appreciated by the clients.

The Superway GP2Y1010AU0F PM2.5 Optical Dust Sensor Module is designed to detect dust and smoke particles in the air using an infrared emitting diode and phototransistor. This Superway sensor measures reflected infrared light from airborne particles to provide an indication of dust concentration. The Superway GP2Y1010AU0F operates with a DC 5V 2V power supply and has a typical clean-air output voltage of approximately 0.9V. Its sensitivity is specified at approximately 0.5V per 0.1 mg/m3, making it suitable for air quality monitoring and dust detection applications. The Superway optical dust sensor can be used in air purification equipment, dust removal systems, alarm equipment, dust-monitoring robots, and other DIY electronics projects. The Superway module is suitable for integration with microcontrollers and electronic monitoring systems. Key Features: GP2Y1010AU0F optical dust sensor Infrared-based dust particle detection PM2.5 and airborne particle monitoring DC 5V 2V power supply Typical clean-air voltage: 0.9V Sensitivity: approximately 0.5V per 0.1 mg/m3 Uses infrared LED and phototransistor Suitable for air quality monitoring Useful for dust removal and purification systems Suitable for DIY robotics and electronics projects Lead-free and RoHS compliant The Superway GP2Y1010AU0F provides a compact solution for detecting airborne dust and smoke particles. The Superway sensor can be connected to a suitable microcontroller for monitoring and processing the sensor output. The Superway module is useful for makers, students, robotics projects, and air quality monitoring applications.

Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3. Dimension: 1.81 x 1.18 x 0.69" (46.0 30.0 17.6 mm) Comes with Mating Connector Housing for Dust Sensor

Dust sensor allows you to monitor the purity of the air. It is equipped with the Sharp GP2Y1010AU0F sensor, it allows to detect particles with diameter of more than 0.8 m, for example, cigarette smoke. The system is powered by a voltage from 2.5 V to 5.5 V, it works in a range of up to 500 g/m3 with a sensitivity of 0.5 V / (100 g/m3).