Electrical Load Management System

We offer a wide range of Intelligent Load Management.The H.T. consumers have to give their Maximum Demand of power to the electricity boards. Any consumer, if crosses this sanctioned demand, has to pay heavy penalties. One should continuously monitor the demand to maintain it within the limit or control the maximum demand value. SYCON ILM does this job & safeguards the customer from heavy penalties. SYCON MD Controller continuously senses the 3 phase voltage & current, calculate the total KVA integrated over last 15 minutes or 30 minutes as per the selection. This integrated demand is displayed & compared with the set values and an intimation relay will be energized if the demand is approaching towards set higher setting. It compares the Average KVA with the set MD & accordingly gives signal to cut the load if any and control the demand within safe limit. Specifications: Phase:Single PhaseWeight:12/13.5 kgOutput Voltage:220/230/240VAC Available Models:MODELSDESCRIPTION SYCON 4600Available with block window methodSYCON 4600-TAvailable with block window & TOD facilitySYCON 4600-PAvailable with block window & predictive demandSYCON 4600-BTPA vailable with block window, TOD & predictive demand facilitySYCON 4600-SAvailable with sliding window methodSYCON 4600-STAvailable with sliding window & TOD facility

Established in 2021, Ashok Heaters, one of the leading Manufacturer, Wholesaler and Trader of Nozzle Heater, Bobbin Heater, Cartridge Heater, Band Heater and many more. Our guide Mr. Dantani Sanjay Ashokbhai

dg load management

We offer a wide range of Load Management System to our customers. Load Management Panel make Energy Management solutions through an integrated network extremely simple and cost effective to implement. The Load Management Panel compact size.

Load Management is the "proper management of load which means balancing the electrical power supply with the variations in the load and its behaviour. As we all know that there are generation stations connected in parallel to each other to ensure continuous supply of power to the load. In the LOAD Management, there are ACB/contactors and the closing / opening of these ACB/Contactors maintain the Load management.Since electric power cannot be stored and used later, so Electricity is produced, distributed and consumed by the Load simultaneously and this is the place where Load Management comes into Action. Also as the Load demand is not fixed so we have to design the system keeping in mind the Maximum Load Condition. As for example when the Induction Hardening Machine is started then there is a sudden increase in the load by 400 - 600 % , so we have to keep in mind all these behavior of loads. There are many ways for Load Management but here we will focus on PLC based Load Management. PLC Programming for Load Management? To do Load Management using DG Sets, we will need an overcurrent relay that will tell us all the data regarding current and it will help us to determine the load value. The overcurrent relay output will be connected with PLC input MODBUS. We have made this PLC program for Load Management and using Siemens PLC. There are two sections in PLC program, one is for reading data from overcurrent Relay and other is for PLC logic. PLC logic will provide required output to ensure regular load management by connecting with busbars through ACB/contactors.

We are one of the leading manufacturer and supplier of this product

An Electrical Load Management System (ELMS) is a system designed to regulate and control the demand for electricity in a power grid or specific facility. It aims to optimize energy consumption, reduce peak demand, and improve overall grid stability. ELMS can be implemented through various methods, including direct control of appliances, special tariffs, or by influencing consumer behavior through communication and feedback.

This system has many distinct advantages over conventional Power Factor Correction system. The switching of capacitors is done by electronic switches, which are automatically connected during capacitor current zero crossing, to allow for capacitor switching with no transient effect. This system offers low cost PF correction for relatively stable loads.

One of the riskiest spaces to manage in any arena is securing the electrical system. Human management is prone to errors and to minimize the errors a large number of personnel are required. This can be expensive and difficult to manage. Read More

We offer a microprocessor based generator control, engine management & monitoring package. It is designed for use with an AVR (Automatic Voltage Regulator) & an automatic speed controller to automate, protect & monitor diesel or gas engine based generator sets.

Analogics tech india limited, an iso 9001:2008 company, specialized in design, development and manufacturing of wide range of products for power sector. Analogics has the track record of providing state-of-the-art product range and turnkey projects various the electricity utilities in the country.Analogics has a market share of about 95% for spot billing machines and a major share in common meter reading instruments (cmri) in india. With the profound reputation, analogics takes pride in quick deployment of innovative and cutting edge solutions.

RLMU is one of the best applications of automation technologies in the power sector management. It uses PLC & GSM technologies to track the utilization of power in a particular area. Features : Use of GSM for Remote load management.Use of PLC for controlling the power utilization.Effective & efficient use of valuable electricity.Power theft can be reduced.Robust design to suit harsh environments.IP65 protected panel.Real-time display of consumed power, voltage, current and more.

This system has many distinct advantages over conventional Power Factor Correction system. The switching of capacitors is done by electronic switches, which are automatically connected during capacitor current zero crossing, to allow for capacitor switching with no transient effect. This system offers low cost PF correction for relatively stable loads. The Special Features of the system are Speed 2 to 120 secs. Accurate control of power factor by means of close loop control and measuring circuits. Uses all three phase capacitors.

KP Circuit City Private Limited, based in Ahmedabad, Gujarat, is a manufacturer and supplier of industrial weighing and automation solutions. We offer Load Cells, Compression Load Cells, Beam Load Cells, Load Indicators, Load Controllers, Weighing Systems, Load Cell Amplifiers, Transmitters, Weighing Controllers, Silo Hopper Weighing Systems, Tank Weighing Systems, Crane Load Cells and Digital Weighing Indicators. Our products are designed for reliable and accurate industrial weighing applications.

Any lab testing service under national test house.

Lightchek

On previously electrified telecommunication sites, from time to time, emerges the necessity of enhancing the existing electricity load. This may occur due to sharing of a site by multiple telecommunication service operators, or for any other technical purpose.The electrification team at Quadra handles the entire process of up gradation of the electricity load at such telecommunication sites. This includes taking charge of all official as well as technical formalities, right from applying for the additional load with the electricity board, putting into place any required equipment; obtaining authorization for enhanced electricity load, leading up to the commencement of the same at these sites.