Gang Programmer

Octoprog C can be used to program single devices by copying data held in an internal flash memory to the MCUs internal memory. It provides an RS232 communication port for interfacing and automating the production programming process. Economical means of programming the internal flash memory of a wide range of RL78/R8C family of microcontroller units. Stand-alone programming mode of operation. Single +5V, 2A dc power supply requirement. Eight pairs of 14 pin FRC male connectors to accommodate for up to eight MCU programmer stations. Multicolor Status LEDs for each programming station. Supports encryption of hex file with a 16-digit password key. Supports Factory reset function

The MP8011A Gang Programming System, in combination with a standard personal computer, is a full featured, high-performance multiple (gang) programming system specific for EPROM-, EEPROM- and FLASH-based microcontrollers. MP8011A supports the concurrent programming of up to eight devices; different device packages can be accommodated through DIP, SDIP, SOIC, PLCC and QFP adapters. MP8011A is a PC-hosted programmer: it communicates with the host PC through the LPT parallel port. The MP8011A hardware has two separate sections: a single, universal and upgradable base unit, ready to support current and future devices, and a number of device-specific programming heads. Blank checking, reading, erasing, programming and verifying operations are supported. MP8011A is ready to support future devices. The upgrade operation for the support of new devices is as simple as downloading new releases of the PC software, always available from SofTec Microsystems' web site, and eventually changing the device-specific programming heads. The modular approach (a general-purpose base unit and dedicated programming heads) represents the best tradeoff between cost and reliability, since it allows users to replace damaged heads at a minimum cost. MP8011A can be operated with a single push-button, the PC being only used to preset essential parameters like device, input file, device options. The MP8011A standard delivery package consists in the main gang programmer unit, external power supply adapter, parallel cable and user's guide. Programming heads can be chosen among the many possible packages to fit user's requirements.

SuperPro 7000 N*Cluster is a two-in-one deal! For production operation, SuperPro 7000 N*Cluster operates in stand-alone (without a PC attached) mode. Supported devices include high density Flash(eMMC NAND), EPROM, EEPROM, PIC, AVR and other popular microcontrollers and PLDs. Users have the benefit of using the programmer as: 1. A universal programmer for engineering application. 2. A manufacturing programmer for volume production.

It System, in combination with a standard personal computer, is a full featured, high-performance multiple (gang) programming system specific for FLASH-based microcontrollers. MP8011A supports the concurrent programming of up to eight devices; different device packages can be accommodated through DIP, SDIP, SOP, SSOP, PLCC, QFP and TQFP adapters.

Xeltek SuperPro 7000 High Speed NAND Flash Programmer description: Xeltek SuperPro 7000 is a menu-driven software that operates a series of cost-effective, reliable, and high-speed universal programmers. SUPERPRO communicates through a USB 2.0 port and operates with most IBM-compatible desktop and notebook computers that based on Pentium. Menu-driven software interface makes all the operations quite user-friendly. Ultra-Fast Programming Speed: Built-in ARM11 MCU Processor improves eMMC/NANDFlash programming speed by 10 times compared to SuperPro 5000Supports eMMC / NAND files up to 256 GBSupports Intel LR1 and LR2 eMMC modules (up to 64 GB)Powerful new algorithm to program up to four chips simultaneouslyCustomized 4-socket gang adapter + Programming algorithm (Optional)Devices user wants programmed could be added quicklyNew generation of pin-driver technology ensures higher reliabilityThree Operating Modes:1. PC mode via USB2.0 port and PC communication.2. Local Area Network (LAN) mode for access to LAN local or remote control a) One or more units may be controlled by an operator for gang / cluster operation for volume programming. (Optional) b) One unit may be shared by multiple users in a lab environment. (Optional) c) A unit on the factory floor may be controlled remotely. 3. Stand-Alone mode (no PC required).Operates via built-in keyboard, LCD display and removable memory (standard SD card). Setup is flexible and simple to expand (1-15 units) for large volume production on the factory floor. Projects files (limited only by SD card capacity limit) are created online and downloaded into the SD card. Features Universal 144 pin-driver - New pin-driver technology provides a cleaner signal, wider voltage range and more accurate clock frequency.Universal adaptors are available for various package types (up to 144 pins). New device support is fasterImproved chip security mechanisms with built-in self-calibrationAutomatic chip detectionImproved overvoltage / overcurrent and ESD protection to avoid programmer damagePowerful yet user-friendly software features streamline operations, improve efficiency and reduce user mistakes during programming proceduresProduction mode start chip operation upon proper chip insertion.Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.Password can be set for project files for volume production controlBatch command combines device operations like Program, Verify, and Security into a single command at any sequenceSerial number generator is available as standard or customer-specific functionsLog file is useful for quality trackingSupports Windows XP / Vista / Win7XELTEK adds devices upon customer's request. General algorithm upgrades completed within a week

Octoprog Series in Product and solutions

Gang Programmer

Living Ganga Programme

CNC VMC Programmer