Green Leaf Sifter

(A) For CTC It is vertically vibrating machine used as withered leaf feeder to supervane / rotorvane. Vibrating action of the Machine breaks the lump of withered and feed the leaf evenly to Supervane /Rotorvane. It also cleans withered leaf from foreign particles and dust through sieving operation.(B) For Orthodox It is also used after rolling table to extract 1st fine and 2nd fine from rolled tea during orhtodox manufaturing by using a perforated tray of specific hole size.Operation:This is a hanging tray vertically vibrating machine. Four rigid arm of the machine hold the tray for vibrating action and vibrating action pass on to the tray through connecting rods and eccenric action.For CTC: Withered leaf is fed to a specialty designed hopper mainly to receive even feed rate of withered leaf to Rotorvane / Supervane in case of CTC operationFor Orthodox: The same machine also used to take out specific sized tender leaf during Orthodox tea manufacturing with the use of preforamet tray.

We are offering our client an excellent quality range of Green Leaf Shifter. These are made from very high quality raw material which ensures high durability at its user end. These are in high demand in the market. Different sizes and designs are easily available in the market.

The machine sifts the withered leafs in a series of hops, ensuring efficient sifting, cooling and ball breaking. It also serves the purpose of cleaning and dropping foreign particles. The oscillatory links are fitted with silent block bushes. The machine is perfectly balanced and vibration free. Low power consumption.

~ Ensures continuous flow of post withered leaf to rotorvane. ~ An unique machine that ensures regulated flow of leaf. ~ Silent in operation. ~ Robust in make. SIGNIFICANT FEATURES 1. For quality control it is necessary to have a constant feed to the Rotorvane and then to the CTC Cutting Rollers. Piling of leaf behind the Spreader of the feed conveyor does not ensure this fully and it is necessary to have a regulated feed to the Rotorvane. 2. For this purpose Mesco has developed a unique machine which gives a controlled feed and also removes any foreign matter and dust from the Withered Leaf before going for processing. 3. Better the control at feed point better the quality. 4. Ensures even output of CTC. SPECIFICATION ~ Length 2438 mm (8 ft) ~ Width 914 mm (3 ft) ~ Height 660 mm (2 ft 2 inches) 5 Nos. Magnet 1 Nos. Comb Glass Fiber Leaf Spring with balancing attachment Leaf cleaning separator Nylon Net Aluminum Tray DRIVE 1 HP 960 rpm Motor and Starter Double Action Crank Drive Pulley and Belt Drive Capacity : 1500 kg adjustable for higher output

SALIENT FEATURES Full load consumption is less than 1 hp. Design of hopper is match to break the lump of withered leaf. Its specific vibrating action helps in efficient sifting, cooling and lump breaking. Silent block bushes are provided for noise free operation.

For better pre-conditioning of the withered leaf, for quality control and for optimization of the CTC output. Constant mechanized feed to the Rotorvane and subsequently to the cutting rollers. Efficiently separates unwanted foreign materials and dust particles from the withered leaf before it goes for processing in the Rotorvane. Also separates any metal particles that could pass through with the help of a powerful magnet bar fitted across the width of it. The height and angle of the magnet bar can be adjusted as per requirement Zenith's Green Leaf Shifter has stainless steel body with steel framework. Special fibre glass spring flats provide support to the feeding bay. The machine is driven with the help of a heavy duty eccentric crank shaft and drive mechanism which propels the leaf forward. To counter the eccentric movement of the feeding tray and to minimize the vibration, another tray is provide to balance the weight of the of the feeding tray. A 1500 gauss powerful magnet bar is properly positioned and fitted to attract metal particles.A discharge lever is provided which controls the discharge of the withered leaf into the Rotorvane.

Introduction Most of today s kutcha sifters have complicated mechanisms and numerous springs and bearings which invariably breakdown, resulting in excessive maintenance costs. They also have further adverse features, such as, the inconvenience and danger of belts and mechanism situated under or near the sifting tray: numerous bacteria traps that unfortunately have come to be regarded as unavoidable accompaniments of sifting. The new Balanced Green Leaf Sifter, however, is free from all these impediments and has been rated as a very efficient machine. Salient feature The Green Leaf Sifter travels in a series of hops, ensuring efficient sifting, cooling and ball breaking action. Feed hopper flow control is positioned and can be adjusted from either side of the machine. The oscillating links are fitted with silent block bushes. No lubrication required. The machine is perfectly balanced; silent and vibration less. Power consumption is merely quarter horse-power.

Manufacturer and supplier of Vibro Green Leaf Sifter. Our range of Green Leaf Sifter is available with the following features and specifications: For quality control it is necessary to have a constant feed to the Rotor Vane and then to the CTC Cutting Rollers. Piling of leaf behind the Spreader of the feed Conveyor does not ensure this fully and it is necessary to have a regulated feed to the Rotor Vane.For this purpose Mesco has developed a unique machine which gives a controlled feed and also removes any foreign matter and dust from the Withered Leaf before it goes for processing.Better the control at feed point better the quality. Specification: Length-2438 mm (8 ft)Width-914 mm (3 ft)Height - 660 mm ( 2 ft 2 inches)5 Nos. Magnets1 No. CombGlass Fibre Leaf Spring with balancing attachmentLeaf cleaning separator Nylon NetAluminum Tray Drive 1 HP 960 rpm Motor Starter . Double Action Crank Drive Pulley and Belt DriveCapacity : 1500 kg adjustable for higher output

Facilities For better pre-conditioning of the withered leaf, for quality control and for optimization of the CTC output. Constant mechanized feed to the Rotorvane and subsequently to the cutting rollers. Efficiently separates unwanted foreign materials and dust particles from the withered leaf before it goes for processing in the Rotorvane. Also separates any metal particles that could pass through with the help of a powerful magnet bar fitted across the width of it. The height and angle of the magnet bar can be adjusted as per requirement Construction Zenith's Green Leaf Shifter has stainless steel body with steel framework. Special fibre glass spring flats provide support to the feeding bay. The machine is driven with the help of a heavy duty eccentric crank shaft and drive mechanism which propels the leaf forward. To counter the eccentric movement of the feeding tray and to minimize the vibration, another tray is provide to balance the weight of the of the feeding tray. A 1500 gauss powerful magnet bar is properly positioned and fitted to attract metal particles.A discharge lever is provided which controls the discharge of the withered leaf into the Rotorvane.

Siftea Balanced sifter is a well proven machine for sifting the Kutcha tea. It serves as a feeder for Rotorvane and CTC machines and also the Sennova processor. The machine is fitted with a stainless steel perforated tray. Tea fed onto the tray moves in a series of hops therby sifting , cooling & breaking the 'balls' in tea. Hopper opening is adjustable. Oscillating arms are fitted with silent needle roller bearings making the machine noiseless and vibration free. Frequent replacement of silent block bushes is avoided. Salient Features & AdvantagesOverall DimensionsCrankshaft RPMPerformationPowerL 3185mm (125.5") W 1230mm (48.5") H 1380mm (54.3") 2708 mm (standard)0.75 KW (1 HP) 960 RPM The machine is elegantly finished with synthetic enamel paint. Strict inspection at our works ensures a perfect balanced sifter for you

The machine sifts the withered leafs in a series of hops, ensuring efficient sifting, cooling and ball breaking. It also serves the purpose of cleaning and dropping foreign particlesThe oscillatory links are fitted with silent block bushes.The machine is perfectly balanced and vibration free.Low power consumption.

Aarkay's Balanced Green Leaf Sifters have perforated Stainless Steel Trays and are equally suitable for CTC, Orthodox and Green Tea manufacture.

Balanced Green Leaf Sifter

GREEN LEAF SIFTERS

The machine sifts the withered leafs in a series of hops, ensuring efficient sifting, cooling and ball breaking. It also serves the purpose of cleaning and dropping foreign particles. The oscillatory links are fitted with silent block bushes. The machine is perfectly balanced and vibration free. Low power consumption.

We are instrumental in offering an excellent quality range of Green Leaf Sifter. Features: User friendlyExcellent quality materialSeamless finish

Vibratory Green Leaf Sifter

Balanced Green Leaf Sifter

BALANCED GREEN LEAF SIFTER

Green Leaf Sifter

Green Leaf Shifter Mini

Balanced Green Leaf SifterGreen leaf sifters are used in the tea industry for pre-conditioning of withered leaves, for quality control and for optimizing output. The machine's vertical oscillating movement causes leaves to travel along the tray in a series of hops, sifting undesirable elements and breaking lumps in the process. The balance is achieved with the help of counter weights. Salient FeaturesTea moves on the tray in a series of bops thereby sifting, cooling and breaking the balls in tea.Feed bopper opening is adjustable.Oscillating arms are fitted with silent block bushes. No lubrication required.Power consumption is only 0.33 Kw.