GSM Remote Control

JRCS JSV-10 Volt Sensor Set:DC19-31V Coil Volt:24V Current:5A Input Volt:DC18-35V

BRAND - JRCS MODEL - JSV-10 TYPE - VOLT SENSOR MAKE - JAPAN

Applications: Houses, Multi- storied Apartments. Hospitals. Factories. Hotels and Restaurants. Commercial centres. FeatuersShalom GSM remote Control Switch Remote control via your mobile phone,Work anywhere in the world where there is GSM cell phone network. This GSM Switch allows switching almost any Industrial or household appliances On or OFF remotely via mobile network.your phone has network you can remotely turn on or turn off your appliances from anywhere at any time.Simply call a number and if the number calling 'Caller ID' is known, then one of the on-board relays is switched to control connected equipment such as lights, gates, doors, heating and more. User can Control / Irrigation pump sets / lights / Heating / Security systems Industrial, Home & Office appliances by any Mobile or Land line phone from anywhere in the world.Manual Switch for bypassSpecification of Shalom Wi-Fi remote switch Micro controller Based Multi-function programmable DTMF Based functioning (call based)Programmable relay latching Optically Isolated Relay output Voltage range: 90-250v AC(50/60Hz)Max current: 10A Max Wattage: 1000 watts Working Temp: 20 -75 Can be customized to meet your requirement .

Nvis 650 GSM Remote Control is used to switch ON/OFF any appliance/motor from a mobile phone through SMS using Android app. The System can be password protected so that any accidental operation can be avoided.Application AreaIrrigation System Industrial AutomationPlant Maintenance Home AutomationSecurity SystemsAlert SystemRemote system monitoringWater well pumpsPumping stations Access control of gates and garage doors Product Features Remotely operatedSMS Control to Start / Stop and get current status through message alertVery easy to install and to operate5 Users can be registered to Nvis 650Password protectionMains status alert through SMSPump ON/OFF LED indicationDelete and updation of user registrationAutomatically sends SMS when input activated.It can be operated in GSM / Manual modeAlso suitable for Single phase / Three phase pumpsQuad-band GSM for worldwide use

Nvis 650 GSM Remote Control is used to switch ON/OFF any appliance/motor from a mobile phone through SMS using Android app. The System can be password protected so that any accidental operation can be avoided.

shalom communicatons

Features: Dual band based GSM Modem independent relays that can be programmed to switch on and OFF Using SMS Two access modes are available, open access where the GSM-AUTO will respond to any incoming call, and secure access where it will only respond to programmed authorized telephone numbers.( Only 1 No ) The relays can be temporarily switched on and Off by sending the GSM-AUTO a text message command, a confirmation text will be returned when the relays turn on and off if required. 6 relay's with normally open (N.O) and normally closed (N.C) contacts, maximum switching capacity is 10 amps @ 230V ac per relay.

A GSM/GPRS modem comes as a handy solution for monitoring and non real-time control applications. Today mobile networks are widely available and this has enabled use of modems across multiple applications. This GSM/GPRS modem can be used in various applications such as elevator monitoring, production monitoring etc. It can be easily integrated with existing embedded applications over serial port and with very easy serial AT command set. RS 232 serial, up to 115Kbaud speedBased on Quectel M95 Quad band module20141211_172010Frequency band: 850/900/1800/1900MHzNote: Two power supply options available on request1) 5V to 12V2) 7V to 24V AUTO MODEMIn many cases, it is required to add wireless interface to your existing instrument. But if the instrument is supplied by some third party, it may not be possible to add AT commands to such a device. This is true with PLCs, HMI, Data loggers that send data in custom format or over MODBUS. In such case, auto-modem can act as MODBUS host. This modem will retrieve data from the instrument and will send over wireless channel using SMS or GPRS. No need to write AT commands (modem internally manages AT commands)Built-in 20KByte RAM for temparay data storageBuilt-in 256KByte FLASH for saving data / settings permanantlyBuilt-in RTC to keep track of date and timeSends data when strongest signal strength is availableCan send data using SMS / Email / TCP-IPDestination address can be permanantly saved in modem itselfModem acts as MODBUS hostRS232 and RS485 half duplex interface availableRS485 can address upto 50 devices (in round robbin fashion)5 to 12V power supplyVery compact form factor (same as regular modem)

We are a top notch supplier of GSM Remote Control.

GSM based device control using AT89S52 with voice acknowledgement

The short message system (SMS) of a standard mobile phone can be used for remote site monitoring and controlling various equipments. The SMS service provided by the service providers is comparatively very low cost. The Short Message Service allows text messages to be sent and received to and from mobile telephones. This feature of a standard mobile phone can be implemented for a variety of industrial applications. The main attractive feature of this system is that the user can monitor and control his desired equipments from any part of the world. It works on the basis of Global System for Mobile Communication (GSM). The user may get the status of a remote device like pressure, temperature, voltage, current, On/Off condition, weight etc by sending respective SMS to the remote device. The remote device also automatically sends a SMS to the user if any error/alarm occurs during its operation, which is previously defined by the user. The user then may take the necessary action depending on the type of alarm through respective SMS or by any other way.

Remote Switch Product

GSM Based Switch

GSM Based Appliances Control

Nvis 650 GSM Remote Control is used to switch ON/OFF any appliance/motor from a mobile phone through SMS using Android app. The System can be password protected so that any accidental operation can be avoided.

Our company has been successful in winning appreciation from the clients as one of the most prominent names in the trading of GSM Remote Control.

Gsm Based Device Control

GSM Based Control Switch

GSM Remote Control

Mobile Remote Control