Hydraulic Paste Kettle

Paste Kettle is widely used for preparation of binder materials which are highly used in medicine and chemical industries. The required powders are dumped in the kettle and water or other solvents are added till desired thickness is achieved. This equipment is designed with jacket through which steam passing to melt material to form paste.

Technical Specification of Paste Kettles :Hemispherical design for proper mixing of pasteJacket for heating element as a part of kettleExternal jacket for Insulation as an optionHeating element via steam ( Provided by customer)Discharge from bottom via butter fly valveInside mirror finishDriven via motor gear box assembly mounted on topDischarge of paste Via. Bottom from butter fly valveAnchor type impeller design for proper mixing of paste75% closed 25 % open top cover deign with proper lockingInsulation jacket on Steam JacketFlame Proof Construction

Paste Kettle

We are leading manufacturer, exporter and supplier of Paste Kettle.

Hydrolic Paste

Paste Kettle

The vessel made out of SS 316 material shell thk 4 mm having openable loose top cover and bottom hemispherical dish end. The vessel is also provided with 4 mm thk MS jacket and hemispherical dish end. The jacket having nozzles of fluid inlet, outlet connection, air vent, pressure gauge etc. The jacket hydro tested at 5 kg/cm2. The vessel insulation done by glass wool covered by 2 mm SS sheet. Inside of the vessel and outside of the insulation buffed and polished into mirror finish. The vessel also provided with Electrical Heater of 6 KW with panel Board.

Salient Features In compliance with cGMP guidelines.Also available with Standard Painted Model.The Paste Kettle is semi-spherical stainless steel jacked bowl (with glass insulation) having two shaft extensions in opposite direction, which are mounted in pedestrail bearing blocks.Foundation can be done with anchor boltsOn the shaft extension, the perfect manual tilting mechanism provided to collect the product by tilting the bowl.Water or suitable liquid is heated inside the paste kettle and after getting proper temperature by the liquid, starch or other binders added to prepare the proper paste & the same is used for further Granulation process equipments like Mass Mixer, RMG, FBD ect. Easy mounting & operation arrangement.Steam or Electrical heating system can be provided as per end user s requirement.Depending upon requirement, Centered Stirrer can be supplied with necessary worm reduction gear box coupled with electric motor with calculated speed. (OPTIONAL).Top Lid (loose type) provided considering safety.Inside surface of the Kettle is mirror polished & outside matt/mirror finish.Suitable operating panel also supplied with the equipment.Available in 50, 100, and 200 Liter capacity of bowl.

Technical Specification of Paste Kettles : Hemispherical design for proper mixing of paste Jacket for heating element as a part of kettle External jacket for Insulation as an option Heating element via steam ( Provided by customer) Discharge from bottom via butter fly valve Inside mirror finish Driven via motor gear box assembly mounted on top Discharge of paste Via. Bottom from butter fly valve Anchor type impeller design for proper mixing of paste 75% closed 25 % open top cover deign with proper locking All the contact part from SS-316 All the non contact part from SS- 304 Main pillar of Kettle will be from SS 304 Operating panel will be fixed on pillar Insulation jacket on Steam Jacket Flame Proof Construction Capacity of Paste Kettle : Standard models range from 50 Ltrs to 250 Ltrs.

Hydraulic Paste Kettle

Hydraulic Paste Kettle