Illuminance Meter

Reliable illuminance measurements with the LXP-10A light meter Device of the highest class A thanks to cooperation with LP-10A measuring probe. Therefore it allows to make the most accurate measurements in industrial zones and public facilities. In addition, the instrument has the ability to wirelessly send data to Sonel Reader PC software. Main features measurements in class A high resolution up to 0.001 lx highly accurate measurements measurements of all types of light sources including: LEDs lamps, incandescent lamps, fluorescent lamps, electrodeless lamps, high and low-pressure lamps no need to using correction factors photodiodes with filters make the spectral sensitivity characteristics well matched to the requirements of C.I.E. Product functions data-hold for freezing measuring values automatic zeroing peak-hold for freezing the peak signal of light pulse capable of selecting measuring mode in Lux or FC scale MAX and MIN results save relative mode easy to read large backlit display USB connection with PC wireless connection built-in memory: 999 points 16 000 values records data logger auto power off

Photometric probe for measuring the ILLUMINANCE, spectral response according to the photopic curve, cosine correction diffuser.

Illuminometer with external probe / Sampling rate 4 Hz / Measuring range 0 ... 400 kLux / Micro-USB interface / Units: lux, footcandle / Optionally with ISO calibration certificate The illuminometer has a large measuring range of 0 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the illuminometer can be positioned appropriately for every measuring task. The measured values ​​can be displayed by the illuminometer in lux and in footcandles. In addition to the normal measured value display on the illuminometer, the measured value is also displayed on a scale. The illuminometer has additional functions so that an analysis of the illuminance can be carried out. With the additional functions of the illuminometer the largest and smallest measured value can be output using the "MIN" and "MAX" buttons. In addition, the displayed measured value can be set in relation to a reference using the "REL" button. With the "PEAK" function, the illuminometer records peak values. The illuminometer has a sampling rate of 10 s. The PCE-LMD 10 also has a data memory of 32,000 measured values. The measured values ​​from the illuminometer can be read out and analyzed on the PC after a measurement. A live measurement on the PC with the illuminometer is also possible. The data from the illuminometer can be exported in CSV format for further processing. The built-in 3.7V Li-Ion battery can be recharged from the illuminometer via a 5V DC connection via the micro-USB interface. Due to its measuring range and its various functions, the illuminometer is used to control the lighting in greenhouses, at the workplace in production workshops or in photo studios, for example. Optionally, the illuminometer can be equipped with an ISO calibration certificate SPECIFICATION; Accuracy 5% of measured value 10 digits with standard light A 10% of measured value 10 digits Repeatability 2% Sampling rate 4 Hz Sampling rate peak hold 10 s Sensor Silicon photodiode with spectral filter Battery status display Battery symbol appears, when the battery voltage is too low. Interface Micro-USB (only for charging) Power supply battery 3.7V Li-Ion battery Power supply USB 5 V DC, 1 A Operating conditions -10 50 C / 14 ... 122 F / 80% RH, non-condensing Storage conditions -20 50 C / -4 ... 122 F / 80% RH, non-condensing Dimensions Meter: 162 x 88 x 32 mm / 6.4 x 3.5 x 1.3 in Sensor: 102 x 60 x 25 mm / 4 x 2.4 x 1 in Weight ca. 320 g / 11.3 oz

LS335 Spectral Illuminance Meter with Touchscreen Measure Lux CCT CRI PPFD for LED Grow Light Plant Lighting Spectrum Analysis NIW Spectrometer

UT383 Mini Light Meter UT383 is a mini light meter equipped with photoelectric sensing technology, which can effectively represent light intensity with electrical signals, then processes data and displays the result on LCD. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring light intensity in homes, offices, schools, laboratories, indoor farming, hospitals, and other areas.

Model Z-10 Measurement function Illuminance,Illuminance difference,Illuminance proportion, Integrating illuminance, Average illuminance Photoelectric sensorSilicon photometer head V( ) Mis-match f1' 3.5%(standard class)or f1' 5%( class 1)Measuring rangeIlluminance???0.01lx~300klx; Integrating illuminance???0.01lx h~999.99Mlx h; Test Accuracy 4%???according to JJG245-2005???or 1%???according to JJG245-2005??? Display mode 5 digits LCD display windowCommunication interfaceUSBCalibrationCCF(Color Correction Factor), zero, and calibration functionHolding functionHolding the readings, easy to readStoring functionstoring up to 30 sets of measurements data, power fail safeguardPower supplybattery / AC adapter(Optional) Standard accessories MCU, photometer head, battery

The new LXP digital light meter family allows for a very precise measurement of illuminanace. Thanks to very high resolution (resolution 0.01 lx ) allows for escape route emergency light measurement. All of three light meter have built-in memory for measurement result storing, and additional function making work much easier.

Gm Luminance

Features To measure solra radiation and solar energyAvailable with either current ( 4-20 mA d.c.) or Voltage OutputOn-site two points ( zero & span) calibrationWeather proof enclosureSilicon photosensor provide good match to light spectrum and long term stabilityUser selectable Range 0 - 200000 LUX with fine adjustmen Specifications Measuring Range : 0 -200000 LUS in three range selectable , 0-2000 , 0-20000 , 0-200000 LUXOutput Signal ILXT-200A : 4-20 mA dc 2 wire ILXT-200V : 0...1 Vdc , 0---2 Vdc, 0---5 Vdc, 0--10 Vdc. Accuracy : +/_ 3% ( Different for different material)Sensor : Silicon Photo sensor with filterResponse Time ( 90%) : Approx. 300 mSec.Fine Adjustment : Zero & Span adjustable on each range by separate potentiometerPower Supply: DC 9-32 VDC @ 150 mA Ambient Temperature : S-Type : -40 to +65 Degh. cel. separate sensor. W -Type : - 15 to +55 Deg. cel. Cable Length :Standard 2 mtr sensor . For other length please consult. Size : Main Transmitter ( Dia x Height in mm) : 90 x 54 . Detector ( Conical) ( Dia x Height in mm) : 36.5 - 72 x56 Application(s) : Greenhouse, Agriculture, Light & Sound, Building Automation, Animal /Poultry Housing etc.

Add to WishlistAdd to QuotationsUNI-T UT381A Illuminance Meter UT381A is a safe and reliable digit light meter with wide range measurement, widely used in lighting applications, laboratory, office, street lights construction, commercial venue and others. Wide measurement range, 0~400000 lx Probe of integrated, split and rotatable design Data storage Bluetooth APP connection supported Colour Correction Coefficient(CCF) Real-time display

Gholographic Company offers Pocket Illuminance Meter offers accurate and easy measurement of illuminance.it is a useful pocket device applied in gymnasium, square, office, factory and station hall, ect, and meets the international standards.

Lisun Group India Manufacturing and supplying Pocket Illuminance Meter. This Pocket Illuminance Meter has performance of high precision, low consumption, small volume, stable performance and convenience operation. It's mainly used in industrial field for illumination photometry. Measures:Illuminance Features: Automatic range switching, Low zero drift, high accuracy Measuring range: 1.0lx-200Klx Accuracy: Class 1 Fine V( ) and cos corrected detector Low power consumption and automatic power off Four-position liquid crystal indication with field angle of larger than 60 degrees if you are interested in purchasing Pocket Illuminance Meter. Please drop us your inquiry / requirement

Features Easy to use simple, multi-function operation, with keypad cover to avoid accidental operationAutomatic Calibration automatically adjusts to zero at powering on for immediate measurementAuto-range functions enables the instrument to have the ability to measure a wide range, automatic or manual settingLCD screen backlit, LCD screen displays average values, illumination, comparison of illuminance valuesPortable small, compact, and powered by AA-size batteriesInterface with computer changed from RS-232C to USBMeasurement of PWM-controlled light sources Application To measure the illumination(Lux) of light hitting a specific area. Specification Model T-10A T-10MA T-10WSA T-10WLA(Standard receptor head)(Mini receptor head)(Waterproof mini receptor head)(Waterproof mini receptor head)ReceptorSilicon photocellMeasuring functionsIlluminance (lx or fcd), illuminance difference (lx or fcd), average illuminance (lx or fcd), illuminance ratio (%), integrated illuminance (lx h or fcd h), and integration time (h)Measuring rangeAuto range; 5 manual ranges at the time of analog outputIlluminance: 0.01 to 299,900 lx; 0.001 to 29,990 fcdIlluminance: 1.00 to 299,900 lx; 0.1 to 29,990 fcd *2Integrated illuminance: 0.01 to 999,900 103 lx h; 0.001 to 99,990 103 fcd h / 0.001 to 9999 hDisplay3 or 4 significant-digit LCD with backlight illumination (Automatic illumination)Illuminance meter classConforms to requirements for Class AA of JIS C 1609-1: 2006 Illuminance meters Part 1: General measuring instruments Conforms to DIN 5032 Part 7 Class BConforms to requirements for specialIlluminance meters of JIS C 1609-1: 2006

Illumination Lux

CX-800C Imaging Luminance Meter

Illumination Meter

The new LXP digital light meter family allows for a very precise measurement of illuminanace. Thanks to very high resolution (resolution 0.001 lx ) al..

Gholographic Company offers Pocket Illuminance Meter offers accurate and easy measurement of illuminance.it is a useful pocket device applied in gymnasium, square, office, factory and station hall, ect, and meets the international standards. Specifications Measuring range: 0.2lx~200lx/2klx/20klx/200klx Accuracy : Class 1 (according to JJG211-2005) 4 digit LCD display Robust and footprint design Power source: single 9v battery Low power consumption and low battery indicating Display inferval rate: >3 readings/s Dimension: 65mm x 30mm x 24mm Weight : 150g Power consumption :80mw