Multichannel ADC

Features: Ultrasmall X2QFN Package: 2 mm 1.5 mm 0.4 mm Wide Supply Range: 2 V to 5.5 V Low Current Consumption: Continuous Mode: Only 150 A Single-Shot Mode: Automatic Power Down Programmable Data Rate: 8 SPS to 860 SPS Single-Cycle Settling Internal Low-Drift Voltage Reference Internal Temperature Sensor: 0.5 C (Maximum) Error: 0 C to 70 C Internal Oscillator Internal PGA Four Single-Ended or Two Differential Inputs This is a breakout board in the true sense, the PCB breaks out all the pins of the ADS1118 and simply offers a smoothing capacitor over the power rails. Inline header pins are included but not soldered to the board. The ADS1118 is a precision, low power, 16-bit analog-to-digital converter (ADC) that provides all features necessary to measure the most common sensor signals in an ultra-small, leadless X2QFN-10 package or a VSSOP-10 package. The ADS1118 integrates a programmable gain amplifier (PGA), voltage reference, oscillator and high-accuracy temperature sensor. These features, along with a wide power supply range from 2 V to 5.5 V, make the ADS1118 ideally suited for power- and space-constrained, sensor-measurement applications. The ADS1118 can perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from 256 mV to 6.144 V, allowing both large and small signals to be measured with high resolution. An input multiplexer (MUX) allows to measure two differential or four single-ended inputs. The high-accuracy temperature sensor can be used for system-level temperature monitoring or cold-junction compensation for thermocouples. The ADS1118 operates either in continuous-conversion mode, or in a single-shot mode that automatically powers down after a conversion. Single-shot mode significantly reduces current consumption during idle periods. Data are transferred through a serial peripheral interface (SPI ). The ADS1118 is specified from 40 C to +125 C.

ADS1115IDGST 16-Bit 4-Channel Single Ended 860S/s ADC IC VSSOP-10 Package The ADS1113, ADS1114, and ADS1115 devices (ADS111x) are precision, low-power, 16-bit, I2Ccompatible, analog-to-digital converters (ADCs) offered in an ultra-small, leadless, X2QFN-10 package, and a VSSOP-10 package. The ADS111x devices incorporate a low-drift voltage reference and an oscillator. The ADS1114 and ADS1115 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS111x well suited for power- and space-constrained, sensor measurement applications. The ADS111x perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from 256 mV to 6.144 V, allowing precise large- and small-signal measurements. The ADS1115 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1114 and ADS1115 for under- and overvoltage detection. Tags, LTC1867AIGN#PBF, LTC1867, 1867, 584-LTC1867AIGN#PBF, LTC1863, LTC1867AIGN, Ltc1867aign, ADS1115LIDGSR, ADS1115IDGST, ADS1115IDGSR, ADS1115BQDGSRQ1. To Buy More ADC ICs: Click HereFeatures: Ultra-Small X2QFN Package: 2mm 1.5mm 0.4mm Wide Supply Range: 2V to 5.5V Low Current Consumption: 150 A (Continuous-Conversion Mode) Programmable Data Rate: 8 SPS to 860 SPS Single-Cycle Settling Internal Low-Drift Voltage Reference Internal Oscillator I2C Interface: Four Pin-Selectable Addresses Four Single-Ended or Two Differential Inputs (ADS1115) Programmable Comparator (ADS1114 and ADS1115) Operating Temperature Range: 40 C to +125 C Features/Specs: Manufacturer Part No: ADS1115IDGST Manufacturer: Texas Instruments Product Type: ADC Analog to Digital Converters Series: ADS1115 Resolution: 16 bit Number of Channels: 2 Channel/4 Channel Interface Type: I2C Sampling Rate: 860 S/s Input Type: Differential/Single-Ended Architecture: Sigma-Delta Analogue Supply Voltage: 2V to 5.5V Minimum Operating Temperature: -40 C ~ +125 C Features: Comparator, Oscillator, PGA Integral Nonlinearity: 1 LSB Moisture Sensitive: Yes Number of Converters: 1 Converter Digital Operating Supply Voltage: 2V to 5.5V Power Dissipation: 500 uW Power Consumption: 300 uW Reference Type: Internal ADC Type: Precision ADC Mounting Style: SMD/SMT Package/Case: VSSOP-10 Application: Portable Instrumentation Battery Voltage and Current Monitoring Temperature Measurement Systems Consumer Electronics Factory Automation and Process Control Datasheet: ADS1115IDGSTPackage Includes: 1 x ADS1115IDGST 16-Bit 4-Channel Single Ended 860S/s ADC IC VSSOP-10 Package Note: Product Images are shown for illustrative purposes only and may differ from the actual product.

The 4-Channel 24-Bit ADC Card is a high-precision analog to digital conversion module designed for industrial applications requiring accurate sensor data acquisition. With four independent analog input channels and 24-bit resolution, this ADC module captures sensor signals with exceptional accuracy and stability. It uses Modbus RTU communication over isolated RS485, making it easy to integrate with PLCs, HMIs, SCADA systems, or IoT gateways. The module supports a variety of industrial sensors such as load cells, temperature sensors, pressure transducers, and current/voltage outputs. Visual LED indicators help technicians monitor communication and channel health at a glance. The ADC Card is ideal for process monitoring, automation control, weighing systems, and OEM embedded solutions where reliable and precise analog data collection is essential.

ADC interface allows a user to study the technique of successive approximation ADC (ADC 0808) with tri-state outputs.The ADC-0808 is a CMOS device with an 8 bit analog to digital converter, 8 channel multiplexed control logic. This ADC converter uses successive approximation as the conversion technique. The 8 channel multiplexed can directly access any of 8 single ended analog signals.Features:Resolution 8 bits Conversion time -100 micro secSingle supply -5V8 channel multiplexer with latched control logic0 to 5V analog voltage range with single 5V supplyLow power consumption- 15mWLatched tri-state output Technical Specifications:v 8 bit 8 channels ADC onboard 0-5v voltage sourcing facility and 8 external inputs sourcing from signal conditioning modules, which accepts different sensors and process inputsv For giving Analog input either Pot R2 or LM35 interface facilitesv Onboard Relay for ON/OFF according to set pointsv 6 digit multiplexed display and LCD display interface facility for indication of outputv 26 pin and 10 pin BOX header for external interfacev -ve voltage generated on board from +ve voltage dc power supplyv Sensor compensation is done onboard

Food grade chemical blowing agent used as an ageing, bleaching agent and dough conditioner

Multichannel ADC

Multichannel ADC

* Incorporates ADC 0809. * Start of Conversion by manual switch (or) software. * End of Conversion (EOC) monitored through Interrupt / Polling. * Display of digital data using LED's * All the 8 channel analog inputs terminated. * Trimpot is provided on-board to channel 0 or 3 or 6. * Provision for test points fault analysis points.

Incorporates ADC 0809. Start of Conversion by manual switch (or) software. End of Conversion (EOC) monitored through Interrupt / Polling. Display of digital data using LED's All the 8 channel analog inputs terminated. Trimpot is provided on-board to channel 0 or 3 or 6. Provision for test points fault analysis points.

Multichannel ADC

ADC

Adc

Multichannel ADC

Adc

Adc12 Meral

Adc

Multichannel ADC

ADC

Adc Interface Board