Patching Compounds

Stainless Steel blades with two knives Nylon comfortable grip

Coke Woven Dusting Compound

1-CoatingsEtching compoundRust removerAnti-rust coatingRubberized coatingMoisture displacer and corrosion inhibitor

patch seal

Dr Road Asphalt Patch

bottom compound

Patching pin

Description :CORPATCH COKE OVEN PATCHING COMPOUND THE PRODUCT CORPATCH is a refractory patching compound for repair of Coke Ovens, specifically for patching of gaps between the metal flash plates and brick work, gaps between bricks, wide cracks and cavities in brick workPRODUCT FUNCTION CORPATCH comprises of refractory materials with selected granulometry and superior binder system. When mixed with about 30% water, CORPATCH forms a paste which is used for patching of defective areas Because of the superior binding system and good suspension agents in the product, CORPATCH ensures good adherence to the brick work and gradual development of strength with increasing temperature. This in turn ensures a good service life of the repaired areas with normal Coke Oven operating temperatures and conditions. CORPATCH can be applied easily by trowel or spatula into the gaps and cavities. BENEFITS: Due to good workability and plasticity, CORPATCH can be easily applied into the cracks and cavities. CORPATCH has low drying and firing shrinkage, thus ensuring good adherence of the patched mass to the defective areas, resulting in longer service life of the repaired areas. Due to good adherence property and low initial sintering temperature, the rebound loss of CORPATCH is much lower.CORPATCH can be used on silica, semi silica and fireclay refractory brick work CORPATCH is an acid free system, hence less hazardous to use. PRODUCT APPLICATION: The areas of brick work required to be repaired is normally cleaned with a scrapper and compressed air.CORPATCH is mixed with water in given ratio to arrive at a paste of patching consistency. This paste is then applied on the defective area and leveled with brick work using long handled trowel or spatula. PRECAUTIONS: CORPATCH is to be stored in dry and covered area away from direct heat sourceThe contents of a bag of CORPATCH is to be used fully at a time. If some material is left out in the bag, the mouth should be tied properly. PACKING: CORPATCH is packed in 25 Kgs. poly lined HDPE bagsSHELF LIFE: Shelf life of CORPATCH is Six Months when stored under dry covered storage conditions

Patching Compounds

Patching Compounds

Uses Patchroc has been specially designed to provide a fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing with minimum down time. Patchroc will be of particular interest to industrial maintenance engineers, transport managers, airport authorities or anywhere that pot holes in concrete cause a hazard to pedestrian and wheeled traffic. Advantages Medium Fast setting - Minimum disruption to traffic Easy to use - Needs only the addition of water. Easy to lay - Very easy to apply finish Non shrink - Does not crack High adhesion - Use Nitobond AR as primer ensures good bonding to concrete substrates. Durable Tough surface - Resistant to wear and tear Description Patchroc is supplied as a pre-blended dry powder to which water is added to produce an easily trowellable mortar. Patchroc is a blend of inorganic cements, additives to modify and control the rate of setting and strength gain, with selected hard wearing aggregates. Patchroc does not contain calcium chloride. Patchroc has been designed for the patching of small areas of concrete i.e., individual patches requiring not more than 12.6 litre yield per 25kg bag of Patchroc. The blend of cements eliminates shrinkage with the consequent reduction of stress at the bond line. Long lasting adhesion is ensured by the use of Nitobond AR bonding agent. Technical support A technical advisory service is available for onsite assistance in the use of Fosroc product range.

Composite developed specially for Floor Patching, Gap Filling in Concrete Floors and structures. Negligible contraction.

It is a Magnesia-Resin based compound which is used as a patching material. With high resistance towards scouring, this abrasive material protects the bottom stool from the ladle teeming stream. It provides the user with a twofold advantage of protection of stool surface as well as reduced usage of precious insert plate.

ISOCRETE is a non redispersible fluid holding admixture used to generate polymer adjusted solid and mortar. ISOCRETE is a smooth white, water based emulsion of high solids acrylic polymers and modifiers. ISOCRETE is non-yellowing, and has great imperviousness to ultraviolet corruption, heat and most regular chemicals. ISOCRETE does not change the shade of the mixture. Primary Applications: Cement based coatings, toppings, patching, mortars, leveling compound, stucco, and terrazzoMixing Liquid for other admixtures Features: Increase flexural and tensile strengthImproves bond strengthReduces shrinkage Benefits: Resists water penetrationProtects against freeze-thaw damageNon-yellowing Specifications: It is an acrylic polymer water proofing, bonding and curing agentApplications: Water Proofing purpose, ISOCRETE should be mixed @ 1:1:2.5 (ISOCRETE: water: Cement) bonding agent, mixing ratio is 1:0.5:1.5 (ISOCRETE: Water: Cement), curing compound 1:1 with water. For polymer modified mortar add, 1 kg of ISOCRETE for one bag of cementCoverage: water proofing coating: 1 kg of ISOCRETE @ 1:1:2.5 (ISOCRETE: water: Cement) will cover 30 sq. ft. in two coats. Bonding agent kg of ISOCRETE 01:0.5:1.5 (ISOCRETE: Water: Cement) will cover 30-35 sq. ft. in one coat Technical information:Property Unmodified Sand-Cement Sand-Cement with ISOCRETE Compressive Strength, psi (Mps) ASTM C109 3 days: 1,640 (11.3)7 days: 2,345 (16.2)3 days: 2,890 (19.9) 7 days: 3,410 (23.5)Flexural strength @ 7days, Psi (Mps) ASTM C 321 410(2.8)100Bond strength, 7 days, (Mps)56 (0.4)480Tensile strength, 7 days, psi (Ms) ASTM C 190246 (1.7)500Proposed of ISOCRETE ValuepH8-9SolubilityWater dispersibleSpecific Gravity1.04 Application: Use only light pressure on trowel and finish with as few strokes as possible. Keep trowel clean and wet to prevent sticking. Do not over-trowel. Mixes with ISOCRETE do not normally require curing, but on hot, dry or windy days, it is advisable to cover with moist burlap for 24 hours or as recommended. For more details please check the PDF attached.

Thermite Welding Quality.

Description Features/Benefits Typical Applications Shelf Life Dosage/Coverage Packing Available Latex modified thin Patch kit Latex modified concrete repair mortar Provides a strong, wear resistant patch Suitable for both indoor outdoor use Can be used as a concrete repair mortar for floors from 2mm-13mm Achieve a strength of 280 kg/cm2 in 3 days Repairs of industrial floors, aisles, warehouses any damage concrete floor(thick sections) One year un-opened One unit of 10kg when mixed will yield around 4 litres(2050 kg/m3) 10kg project standard.

For designers of communications equipment whose network processing requirements extend beyond simple forwarding, the NFP-32xx delivers high performance packet processing with intelligence, security and virtualization for millions of simultaneous flows. Unlike network processors and multicore CPUs that lack L4-L7 programmability or cannot scale to 10 Gbps and beyond, the NFP-32xx is powered by 40 programmable flow processing cores that deliver 2,000 instructions and 50 flow operations per packet at 30 million pps, enabling up to 40Gbps of L2-L7 processing.