Phone Patch

INTRODUCTION A Simplex/Duplex Phone patch controller unit is a versatile interface unit between a wireless transceiver and telephone line of your EPABX. It gives the feelings of RADIO EPABX. The unit is designed for the users of (VHF/UHF) like you, and is intended to enable you to make a wireless call right from your nearest telephone extension without you actually moving physically to wireless set The unit is designed for the users of (VHF/UHF) like you, and is in- tended to enable you to make a wireless call right from your nearest telephone extension without you actually moving physically to wireless set physically to wireless set. With help of DTMF encoder on your mobile or potables you can dial any telephone number on your EPABX and other portable. With the addition of interconnect, your communication network becomes very much flexible and multidimensional. EASY INSTALLATION The unit is easy to install and is compatible with all popular brand of VHF /U HF wireless .Easy installation saves time as well as coasts AUTOMATIC CALL FORWARD If the base station is unattended, incoming calls can be auto- metrically transferred to mobiles or portables in the field and constant communication is maintained. The ring out setting lets you decide whether the call should be transferred on the first or other no. of rings. The system is smart enough to detect the busy tone and disconnect the line PTT TIME OUT Automatically shuts off the link if the PTT remain active for more than 60 sec, thus saves the wireless equipment from burn out. NO ACTIVITY TIME OUT Automatically shuts off the link, if there is no activity for more than 45 sec LINE IMPEDENCE Unit automatically balances the line impedance. No manual adjustments are required to maintain clear consistent volume levels during communication. HIGHLY RELIABLE OPERATION The use of sophisticated digital microprocessor technology and use of high grade industrial/commercial component makes the unit highly reliable. That means your system Will continue to work for you minimal repair cost. REPEATER MODE Interconnect can be programmed to act as a repeater controller during idling time. TIME OUT TIMER Automatically shuts off the link after a predefined time intervals TON E/PULSE DIALING The systems can be made to dial in either of tone or pulse USER FRIENDLINESS The system is very user friendly and no in-depth knowledge is required for its usage Other Features User Programmable toll restrictions with allow and deny table Selectable number of rings to answer, Mobile activity timer, Courtesy beep Half Duplex or Simplex operation, User Programmable CWID Programmable TONE /PULSE dialing, Adjustable busy tone locking Adjustable VOX operation, Adjustable modulation level Local and over the air programming, Internal and external COR Five LED ¿¿¿¿s on front panel shows the status of the system Patch switch for connect or disconnect the link by operator Public Announcement System connectivity via VHF Radio. Operating temperature range -1 0 to Plus 50 degree

CSI MODEL CS-900 - Simplex Phone Patch The Connect Systems Model CS-900 is a Deluxe Microprocessor based fully automatic VOX (Voice Activated) Simplex Base Station Interconnect. The CS-900 can be operated simplex or through any conventional repeater and many trunked repeaters. Words and syllables are never lost because the built in 1/2 second Electronic Voice Delay (EVD) circuit keys the transmitter 1.2 second before the telephone audio is transmitted. The delay assures that the base transmitter to mobile receiver path is ready before voice is sent. EVD is either unavailable or an expensive add on option in competing interconnects.

From our wide consignment, we are affianced in supplying Phone Patch.

Telephone Patches

Banking on our enriched industry experience, we are able to supply Phone Patch.

Amongst Few Leather Patches