System Analyzer

Pacing system analyzer is used for testing various parameters like R wave amplitude, pacing threshold and lead impedance during implantation of a permanent pacemaker. It can also deliver temporary pacing stimuli for supporting the heart rate if needed, during implant procedure

Operating Modes VVI, VOO, AAI, AOO, DOO, DDD, VDD, DAI Basic Rate 30 TO 140 PPM IN 1PPM STEP Rapid Rate 120 to 500 ppm (basic rate x 4 ) Output Pulse Amplitude For both A,V. 0.2 V to 12 V Pulse Width for both A,V. 0.1 ms to 1.2 ms in 0.1 ms step Sensitivity ATRIUM 0.3 TO 2.4 mV VENTRICLE 2.0 TO 16 mV A-V Delay 30 TO 250 ms Resetable Refractory ATRIUM : 400ms VENTRICLE : 313ms Push button for Impedance Measurements Push button for P Wave and R Wave Measurements Easy operation LCD display for read out Pacing Indicators

SOLAR SYSTEM ANALYZER (PHOTOVOLTAIC I-V CURVE TESTER) WITH DC CURRENT CLAMP, AC POWER CLAMP, THERMO IRRADIANCE METER I-V curve test for solar systemMax. solar system power (Pmax) search by Auto-scan: 1000V, 12A (12000W capability)The analyzer and the Remote Solar Detector is connected by Bluetooth wireless communication (Bluetooth 2.1 + EDR Class 1)The Remote Solar Detector is moisture-proofIntelligent test logic with no personnel attendance required in the field Solar system analyzer waits and tests the system until appropriate sunlight irradiance is detectedMax. voltage (Vpm) at Pmax, Max. current (Ipm) at Pmax Voltage at open circuit (Voc), Current at short circuit (Isc)Efficiency (%) calculation of solar systemTemperature measurement of solar panelsIrradiance measurement of sun lightSeries resistance (Rs) calculation of solar panelsWith data logging/open function, the I-V curves of solar system can be analysed / recorded for a period of time (e.g. 60 min.)Conversion of I-V curve under OPC to data under standard test condition (STC) based upon IEC standardProvide Operating Condition (OPC) and Standard Test Condition (STC) test reports for verification of solar panel performance (OK or NO OK)Users can set up the parameters of solar panelsUsers can set up the series number of solar panels. Parameters of many solar panels can be measured in one measurementThe Irradiances and Temperatures of solar panels can be continuously measured, monitored and recordedContinuously measure/monitor/record the DC power output of solar system and the AC power output of inverter (1 phase or balanced 3 phases)Calculate the efficiency of DC to AC power conversion and the efficiency of the max.output power

The Next Generation in Battery Testing Productivity MDX-600 Series from Midtronics combines 30 years of experience and innovation gained from selling essential tools to nearly every car and truck OEM in the world, with the industry standard conductance technology for battery testing to make testing safe, fast, and simple. Midtronics MDX-600 Series Advanced Features: Multiple vehicle applications, battery types and rating systems Large back-lit screen and improved user interface Integrated printer option Improved removable cable design Midtronics MDX-650P Battery Tester Technical Specifications: Application: For Automotive 12 Volt batteries with without Integrated Printer Test Range : 20 Ah to 200 Ah Batteries Voltage Range: 1V DC 30V DC Uses the power of the battery under test and 6AA internal batteries Housing Dimension: 27cm x 10cm x 5cm Weight: 3Kg Approx.

Widely demanded in commercial area, these Analyzers Devices are best in quality and supplied in the market in complete safe form. Moreover to this, these offered devices are efficient in working and do not require maintenance up to longer years. In addition to this, these presented devices are reliable and easier to use. Features: Optimal workingNo heatingQuality tested Available in: Gas analyzersDust measuring devicesAnalyzer solutionsTraffic sensors

We are listed at the apex in the list of the most trusted Supplier of Refrigeration System Analyser. The use of digital measurement technology with highly accurate sensors sets new standards in precision and assurance of measurement with our Refrigeration System Analyser. The accuracy of the Refrigeration System Analyser is +/- 0.5% fs + 1 digit. This provides assurance in day-to-day working, and forms the basis for the refrigeration engineer s proof of quality. The digital display of our Refrigeration System Analyser guarantees that readout errors can be eliminated in the future.

SOLAR SYSTEM ANALYZER MECO 9018 BT Features : I-V curve test for solar system Max. solar system power (Pmax) search by Auto-scan: 1000V, 12A (12000W capability) The analyzer and the Remote Solar Detector is connected by Bluetooth wireless communication (Bluetooth 2.1 + EDR Class 1) The Remote Solar Detector is moisture-proof Intelligent test logic with no personnel attendance required in the field Solar system analyzer waits and tests the system until appropriate sunlight irradiance is detected Max. voltage (Vpm) at Pmax, Max. current (Ipm) at Pmax Voltage at open circuit (Voc), Current at short circuit (Isc) Efficiency (%) calculation of solar system Temperature measurement of solar panels Irradiance measurement of sun light Series resistance (Rs) calculation of solar panels With data logging/open function, the I-V curves of solar system can be analysed / recorded for a period of time (e.g. 60 min.) Conversion of I-V curve under OPC to data under standard test condition (STC) based upon IEC standard Provide Operating Condition (OPC) and Standard Test Condition (STC) test reports for verification of solar panel performance (OK or NO OK) Users can set up the parameters of solar panels Users can set up the series number of solar panels. Parameters of many solar panels can be measured in one measurement The Irradiances and Temperatures of solar panels can be continuously measured, monitored and recorded Continuously measure/monitor/record the DC power output of solar system and the AC power output of inverter (1 phase or balanced 3 phases) Calculate the efficiency of DC to AC power conversion and the efficiency of the max.output power Standard Accessories Solar Irradiance Meter (Remote Solar Detector) x 1 Thermometer x 1 USB power cord x 1 User manual x 1 AC adaptor x 1 Optical USB cable x 1 Rechargeable lithium battery (3400mAh) x 1 (installed) Software CD x 1 Software manual x 1 Carrying bag x 1 Thermal conductive gel x 1 Testing clips (1 black 1 red) x 1 4-wire to 2-wire connecting cable x 1 4-wire testing cable x 1 Solar 15: DC current probe x 1 Solar 21: AC power clamp x 1 Testing clips (1 black 1 red) x 1

IMR 1050X The newly redesigned IMR 1050X Combustion System Analyzer eliminates the number one hassle for combustion contractors; the annual replacement and calibration of the O2 sensor. By replacing the electro chemical O2 sensor with the EOS Technology CO2 sensor, the IMR 1050X now takes direct CO2 measurements and calculates the O2 level. This lowers the cost of ownership by doing away with the annual replacements of the O2 sensor and reducing calibration drifting typically found with standard electro chemical sensors. The EOS Technology sensor has an unmatched industry leading life expectancy of 10 years! Features Measures: Differential flue temperature, Carbon Dioxide (CO2), flue ambient carbon monoxide (CO) Differential Pressure Calculates: oxygen, gross/net efficiency, excess air, CO air free Work light 4 line backlit LCD display 179 memory positions User customizable parameters view Individual report printouts Unique DMM style rotary selector Protective boot w/integral magnet Real time clock CO readings to 1ppm Infrared printer port

Manual & Motorised System For Tippers Solutions

Systems analysis and inspections

Systems Analysis

Systems Analysis

Systems Analysis

The Micro System Analyzer is the premier measurement technology for the analysis and visualization of structural vibrations and surface topography in micro structures such as MEMS (Micro-Electro-Mechanical Systems) devices. By fully integrating a microscope with Scanning Laser-Doppler Vibrometry, Stroboscopic Video Microscopy and Scanning White Light Interferometry, the Micro System Analyzer is designed with an all-in-one combination of technologies that clarifies real micro structural response and topography. Incorporated in the MEMS design and test cycle, the Micro System Analyzer provides precise 3-D dynamic and static response data that simplifies troubleshooting, enhances and shortens design cycles, improves yield and performance, and reduces product cost. For visualizing deflection shapes and optimizing data acquisition, the Micro System Analyzer also incorporates a geometry scan function to measure the shape of the object under test.

Systems Analysis

Specification Operating Modes VVI, VOO, AAI, AOO, DOO, DDD, VDD, DAI Basic Rate 30 TO 140 PPM IN 1PPM STEP Rapid Rate 120 to 500 ppm (basic rate x 4 ) Output Pulse Amplitude For both A,V. 0.2 V to 12 V Pulse Width for both A,V. 0.1 ms to 1.2 ms in 0.1 ms step Sensitivity ATRIUM 0.3 TO 2.4 mV VENTRICLE 2.0 TO 16 mV A-V Delay 30 TO 250 ms Resetable Refractory ATRIUM : 400ms VENTRICLE : 313ms Push button for Impedance Measurements Push button for P Wave and R Wave Measurements Easy operation LCD display for read out Pacing Indicators

Systems Analysis

Systems Analysis

Systems Analysis

System Analyze

Systems Analysis

Biochemistry Analyzer Tool

System Analyzer

Systems Analysis