Temperature Alarms / Temperature Sensor Alarm

In order to cater the diversified demands of our clients, we have been able to provide a unique range of High Temperature Alarm. Uses: BanksHotelsHospitals Features: Easy to operate Excellent functionality Optimum performance

Omega CN101 High Temperature Alarm Type J 0-250 C

Figure Display -100~400 C / -100~700 F % Output / Set user Selectable. Ultrathin Type , 27 mm width. PC Plastic Case, DIN Rail or Wall Mounting. High Dielectric Strength (AC 2KV / Min. between Input / Output / Power ).

The Alarm Unit DG????3600 is used to monitor limit valuesand regulate simple automation processes in temperaturemeasuring applications with Pt-Sensors.High reliability and Protective Separation are essentialcharacteristics that contribute to fault-free equipmentoperation.Two switch channels can be separately configured. Theswitch point and the switch hysteresis can each beadjusted by means of their own 12-turn potentiometerlocated on the unit s front panel. The switch state isindicated by a yellow LED.The direction of effect and the mode of operation can beswitched by means of DIP switch settings. Both switchoutputs can be set up as either MIN or MAX alarms. Therelay contacts switch high power loads either as N.O. orN.C. contacts.Protective Separation and the 24 V AC/DC power supplymake the DG????3600 universally applicable for allmeasurement and industrial applications, as well as forbuilding automation.

LLA-Dual High-Low Alarm Relay

The SALD mV and Temperature Alarm Unit accepts a mV DC, thermocouple or RTD input signal, compares the input signal with an alarm setpoint, and outputs an alarm signal. One or two absolute alarm outputs can be provided on one input. Direct/reverse action can also be set to each of the alarm setpoints. Alarm LED is provided on the front panel for confirming alarm relay action (when relay is energized). The JHT200 Handy Terminal*is used for setting the Alarm Unit parameters. For the SALD with display setter (SALD- 4), input indication and alarm setpoints can be set on the front panel.

The supco that is Multi-function data logger that monitors temperature, humidity and dew point providing alarm for out of range conditions. Specification : sample rate data history storage memory capacity temperature alarm alarm delay alarm indication 1 sec. To 30 minutes 2 hours to 170 days depending on samples rate. 8150 samples for temperature, humidity and dew point high and low temperature and humidity alarm, condensation alarm user selectable up to 2 hours audio, visual and a relay for remote alarm and phone dialer Sensor probe : operating temperature range operating humidity range dimensions cable length power source battery backup relay - 40 to +60 c 0 to 95% rh, non-condensing 5. 5 x 4. 5 x 1. 6" 300 ft maximum 12 volt to 24 volt ac/dc, 0. 78 watt alarm active. 9 volt alkaline battery - 35 hours of operation during power outage. n. O. And n. C. Dry contact 5a 250 volt resistive loaddata logger. Features : measures and records temperature, humidity and dew point (condensation) audible and visual alarm for all 3 measurement points digital display logs up to 170 days of data (depend on sampling interval) relay contacts for remote alarm or auto dialer serial port connection.

High Temperature Alarm

High Temperature Alarm System

Temperature Alarms

Temperature Alarms

Temperature Alarms

Temperature Alarm Unit