Transmission Analyzer

Features: Online error testing 2Mbit/s unframed error performance testing 2Mbit/s framed N*64Kbit/s channel error testing Frequency offset testing Framed content analysis Multi error and alarm analysis

The SDH is an advanced and handheld. SDH/PDH transmission analyzer, which integrates on-line and off-line test of STM-1 and E1 (2M) and tests of STM-4, 622M, STM-16(2.5G) into one package.

Aquatran Model 2 designed for customers who need to measure WVTR of ultra-high barrier films and packages. The AQUATRAN Model 2 measures water vapor transmission rates accurately and repeatable to 5x10-5 g/(m2-day) and offers the following advantages:The AQUATRAN Model 2 measures accurately to 5x10-5 g/(m2-day) repeatedly. That's an order of magnitude lower than the very successful ModelThe AQUATRACE sensor requires no calibration as it follows Faradays Law and converts every molecule that enters the sensor into a measurable chargeThe transient data is quantifiable and can be viewed during or after the test. Analysis of transient data can yield important information about an OLED structure. For example, users tell us that viewing transient data is important in detecting defects and voids in the coatings applied in OLEDS.Some of more than 11 improvements to the Aquatran Model 2 include:Improved sensor design - increased sensitivityImproved electronics - lower base "noise" levelImproved valve design - reduced leakage in plumbingA new MOCON technology called TruSealTM which reduces seal edge leaks from ambient humidityImproved block design - reduced leaks and reduced seal edge leaksOffered in Two Models:G Model which offers relative humidity for films from 35-90% and a temperature range of 10-40C. Packages at ambient temperature or 10-40C with option environmental chamber.W Model with 100% relative humidity for both films and packages and a temperature range from film of 10-50C. Customers with existing Aquatran Model 1 Master units can upgrade their systems by attaching Model 2 satellites to the Model 1 master.

SBOM 2 MB DIGITAL TRANSMISSION ANALYSER WITH PRINTER (2MB DTA) The meter is used for point to point testing with in-built printer. It is specially designed for Maintenance, Installation Testing stability of 2.048 MB PCM Systems. Transmitter Receiver can be used independently, in point to point testing with two instruments or with one instrument, when line is looped back at other end. Main features model pcmlp-1 Compatible with meters from anritsu, japan tekelec,france Built in printer with ordinary print paper. 16 line big back-light lcd disply. Print result as per ccitt 821.Specification. On line / off line mode. Bit error count, error rate, code error, measurement. Single bit error insertion, self check (off line mode) 48 v external battery operation. Microcontrolled softwareHANDY, LIGHT WEIGHT FOR MOBILE USE.

With extensive experience in this line of work, we have gained enough expertise in manufacturing, supplying and exporting a wide array of analyzers which also includes these supreme quality Transmission Line Analyzer also. These Transmission Line Analyzer are generally used for a wide range of maintenance requirements and featuring of the electric transmission lines. These Transmission Line Analyzer minimize the downtime and overall line maintenance time. These analyzers work on the principle of multiple pulse & echo correlation technology using advanced matrix processors. These analyzers are used widely for fault location, zoom blanking and line signature analysis. Specifications: Application: 66 kv to 1250 kv linesRange: up to 1000 kmAccuracy: 100 mSignature analysis: Every 100 m of the Transmission LineOperating temperature: -30 C to 60 CStorage temp: -30 C to 60 CFault detection: All types of OPEN faults, SHORT faults and faults on spur linesOperating Voltage: 230 VAC and Built-in rechargeable batteryBattery charging voltage: 230 VAC, 10%, 50 HzDisplay: High resolution Graphic LCD display and back lit illuminated LED displayOutputs: 4 formats printout, Graphic LCD display & Complete LSA data to LaptopType of Signal Transmission: PulseControl: Automatic mode and Manual modeProcessing frequency: 0.15 MHz to 1.5 MHzInduction voltage suppression: up to 60 kvSoftware: TADMA Software for loading, reading and reporting of Line Signature dataHousing: IP 67 Pelican casing ACCUMAX is a transmission line analyzer used to locate open and short circuit fault and in homogeneities on the transmission line through Line Signature Analysis. Its important features are: Completely safe for operators even on High Induced LinesFault location: It contains direct digital display which helps in measuring up to a distance 100m of fault in accuracy. Open circuit faults; Phase to Phase faults; Phase to Earth fault and Insulator De-capping are the circuits for which it is usedFully automatic system: (doesn t require any parameter input)Zoom Blanking Its uniqueness lies in the fact that it can easily detect faults on spur lines and other functions with its extensive range blanking abilityLine Signature Analysis Study (LSA) All the prevalent inhomogeneities are revealed along the transmission line. The user can do serial comparisons of this data to deduct deteriorating points periodically which could result in sporadic tripping, power loss, and eventual line breakdownPortability & Flexibility It contains a portable off-line system with innate batteries that are rechargeable and can be used as per need during intervals on any de-energized line emanating from a sub-stationHigher Return on Investment Higher resolution enables ACCUMAX to analyze faults faster with a higher accuracy and precision, helping it reduce its downtime Other InformationPay Mode Terms: L/C (Letter of Credit)Minimum Order Quantity: 1 PiecePort of Dispatch: BangaloreDelivery Time: As per customer requirementPackaging Details: As per standards

W3/130 is based on the humidity sensor method, and is professionally applicable to the water vapor transmission rate test of film specimens.

IDM Transmission

Compact transmission.

2M Transmission Analyzer

SDH/PDH Analyzer-1620A: The SDH-1620A is an advanced and handheld SDH/PDH transmission analyzer, which integrates on-line and off-line test of STM-1(155M) and E1 (2M) and tests of STM-4, 622M, STM-16(2.5G) into one package. Being highly affordable, easy-to-use and scalable, this powerful unit is ideal for installation and maintenance testing over the SDH/PDH transmission and access networks. The function of the equipment includes BERT: BERT test for PDH and SDH and error performance analysis per G821, G826, G828, G829, M2100 and or M2101; directly and automatically compare the test results with standards. Anomaly/defect testing: Tx-end transmitting anomaly/defect events and Rx-end receiving anomaly/defect events with record and statistics; recorded events displayed in chart and/or graphics and supporting filter selection. Overhead testing: overhead emulating transmission and receiving analysis; two parts: general part (including J0/J1/J2/S1/V5/C2) and extended part (all the remaining overhead bytes except A1/A2, B1/B2/B3). Easy operation: 10.4 TFT touch screen, visible graphic display.

MAC's PDH optical range of products multiplexes basic 2Mbps streams into 8/34/140 Mbps PDH streams as per a relevant ITU-T (G.703, G.742, G.751) recommendations. The multiplexed aggregate signal is converted into an optical signal at 1310 nm to be transmitted through a single mode optical fiber cable. The equipment configuration permits availability of stand- alone electrical multiplexers, optical line terminal equipments or regenerators. Large numbers of these equipments are deployed in Indian Department of Telecom network and also in other service providers. Features: Use the advanced technology Give great output Consume least power

IDM Transmission Technologies

Transport Analyzer

2M Transmission Analyzer

Digital Transmission Analyzer (DTA)

sdh analyzers

SDH Analyzer

Digital Transmission Analyzer

E1 Tester, PDH/SDH Analyzer

2M Transmission Analyzer

AQUATRAN Model 3