Vane Mist Separator

We are engaged in offering a comprehensive range of Mist Separator AM to clients. Our customers can avail these products in different specifications from us.

Vane Type Mist Eliminator

The Vane Type Mist Eliminators are hugely used for the separation of liquid droplets from a gas stream. They are formed of zigzag chevron blades. The blade profile can be smooth (for non fouling services) or with hooks (for greater removal efficiency and capacity), formed of closely spaced corrugated plates and suitable for high liquid viscosity systems. Moreover, we provide solutions for any related queries faced by the clients. We have certain advantage of vane type mist eliminator over other eliminator as it has suitable foaming system, higher liquid loading and lower pressure drops.FeaturesHigher liquid loadingLess risk of foulingSuitable for high liquid viscosity systemsCompetitive costLower pressure dropLonger lasting in serviceSuitable for foaming systems SpecificationsMade of closely spaced corrugated platesBoth plane single and double pocketed as per client's demandWedge wire support grid

Chevrons / Vane Mist Separators are largely used for the separation of coarse and viscous mist / Spray (may include solid particles) from Gas Streams and are usually installed in towers or placed in a housing. The Vane Separator is a Lamella type of separator consisting of specially designed vanes with a well defined geometry and can be made using variety of materials (Plastic and Metals), in different sizes and configurations. Chevrons can be designed for New Plants based on the required Gas Flow, Removal Efficiency, Pressure Drop and Fouling Possibilities or can be supplied as a replacement in an existing plant where construction is as per earlier design. Specifications: Pressure rating: 150 Ib to 900 IbRemoval: 100% liquid particles 8 micron and larger

Chevron Seperator

The everon range of mist eliminators are the chevron type of mist eliminators which consist of a set of specially designed vanes with a well defined geometry. Gas with entrained liquid droplets flows between the vanes of the everon separator. The gas can easily take the turns while the liquid droplets cannot follow the gas streamlines and impinge upon the walls of the vanes and coalesce to a size where they drop down and are collected and removed. Applications Due to its constructional features, the everon has a lower tendency to fouling. Recommended areas of operation would therefore include: Applications where droplets will be sticky or viscous and will plug conventional knitted/fiber bed mist eliminators. For systems containing certain solids it would be possible to carry out intermittent cleaning with spray nozzles. Situations where wide flow rate ranges are possible which renders the cyclonic type systems unsuitable.

Vane mist eliminators are physical separation devices that use zig-zag or corrugated parallel plates to force a gas stream into a curving, serpentine path, removing entrained liquid droplets through inertial impaction

Series/CAD Filtration ( m) Air flow L/min (ANR) Port size AM 0.3 (Filtration efficiency 99.9%) 300 to 12000 1/8 to 2 Features Can separate and remove oil mist and remove solid particles such as rust or carbon of 0.3 m or larger

Filtration Separation(vane Seprator).

PURIC Vane Separator Extremely efficient separation of entrained liquids & mists from Gas or vapor flow. 100 % removal of liquid particles 8 micron and larger. Low pressure drop.Principle Design PURIC Vane Separator consist of a set of specially designed corrugated profile blades, vanes within a receiver. Designed specifically for linear flow applications. Vanes have hook pockets for uninterrupted liquid collection and drainage. These vanes having series of short radius turns within close proximity utilize Inertial forces to trap heavier liquid droplets.SIZES AVAILABLE : From 2"NB to 36"NB in Vertical Design & From 2"NB to 24"NB In horizontal design. Pressure Rating from 150 Ib to 900 Ib.

Combination of coalescer and vane separator.

Vane separators (chevrons / droplet separators) are largely used for the separation of coarse and viscous mist / spray (may include solid particles) from gas streams and are usually installed in towers or placed in a housing. The vane separator is a lamella type of separator consisting of specially designed vanes with a well defined geometry and can be made using variety of materials (plastic and metals), in different sizes and configurations. Vane separators can be designed for new plants based on the required gas flow, removal efficiency, pressure drop and fouling possibilities, or can be supplied as a replacement in an existing plant where construction is as per earlier design. Two flow orientations are possible in vane separators, namely horizontal flow and vertical flow.

vane separators

Vane Separators