Conductivity Controller in Mumbai (प्रवाहकत्त्व नियंत्रक, मुंबई)

The BL983313 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream that is within the 0 to 1999 S/cm range. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a dosing pump or a solenoid that controls a valve. Multicolor LED Indicator LED changes color based on status. Fire Retardant Casing For additional safety the controllers outer case is made of fire resistant plastic. Splash Resistant Cover A clear plastic cover protects the face panel from dirt and liquids.

Applications : Electrocoating/Electrophoretic Cathodic Anodic Systems.Metal Reclamation for electroplating.Waste Water Treatment.Pure Water Generation for EDI Systems.Electrodialysis Units.

DEWAG make conductivity level controller utilises the electrical current conducting property of the medium whose level is to be detected. Normally two electrodes are installed in a container/tank. One electrode is set at the bottom of the tank and is called a REFERENCE electrode. The other electrode is set at the point where the level is to be detected. When the material touches this electrode, an electrical current flows between these electrodes . This current is sensed and an electronic circuit actuates an electro magnetic relay, which controls the external control devices. This type of level control gives only ON / OFF output. It is possible to have level indication at more than one point. RS-02 Series Level Controller employs three electrodes to indicate levels at two points, viz. REFERENCE ELECTRODE, LOW LEVEL ELECTRODE, and HIGH LEVEL ELECTRODE. It consists of two parts viz. Sensor Unit and Control Unit. Features Tri colored (Green, Yellow Red) LEDs to display Power On, Low Level and High Level status Two changeover potential free relay contacts for each Low and High Levels Control and Sensor Units are housed in an IP65 enclosure Low and High Level detection points are adjustable on site Easy to install. Dimensions Control Unit: 253mm width X 217mm length X 110mm height Sensor Unit: 120mm width X 140mm length X 70mm height Technical Specifications Supply Voltage:- 230V AC, 50 Hz Ordering Information Series: RS-02 Model: 08

Conductivity Controller

Inductive Controler

Activation of up to four measuring ranges Activation of up to four temperature coefficients Concentration measurement Fast-response temperature probe Plain text operator guidance

Online Conductivity Controller

Conductivity Controller