Sequential Batch Reactor in Thane (सेकेंटिअल बैच रिएक्टर, ठाणे)

Sequencing batch reactor or sbr is a new technology for the treatment of domestic and industrial waste water. It is ideal for treatment of wide range of domestic and industrial waste water at flow ranging from few thousand liters to millions of liters per day. The sbr process treats wastewater by activated sludge process. The Sequencing Batch Reactor (SBR) is an activated sludge process designed to operate under non-steady state conditions. An SBR operates in a true batch mode with aeration and sludge settlement both occurring in the same tank. The major differences between SBR and conventional continuous-flow, activated sludge system is that the SBR tank carries out the functions of equalization aeration and sedimentation in a time sequence rather than in the conventional space sequence of continuous-flow systems. In addition, the SBR system can be designed with the ability to treat a wide range of influent volumes whereas the continuous system is based upon a fixed influent flowrate. Thus, there is a degree of flexibility associated with working in a time rather than in a space sequence.

Sequencing Batch Reactor (SBR)

Sequencing batch reactors (SBR) or sequential batch reactors are a type of activated sludge process for the treatment of wastewater.SBR reactors treat wastewater such as sewage or output from anaerobic digesters or mechanical biological treatment facilities in batches.

Sequencing batch reactor or SBR is a new technology for the treatment of domestic and industrial waste water. It is ideal for treatment of wide range of domestic and industrial waste water at flow ranging from few thousand liters to millions of liters per day. The SBR process treats waste water by activated sludge process.

Mechmann's SBR system is designed for batch treatment of waste water. It's an excellent choice for systems with limited operator attention or experienced operator, and systems that require extremely close control of effluent quality such as for removal of nutrients. Provides the highest water quality surpassing regulatory requirements. Requires a small footprint. Eliminates abusive odor(all treatment is underwater).Requires minimum power(Most treatment is during idle)Requires minimal maintenance(Few moving parts)

The Batch reactor is the generic term for a type of vessel widely used in the process industries. Its name is something of a misnomer since vessels of this type are used for a variety of process operations such as solids dissolution, product mixing, chemical reactions, batch distillation, crystallization, liquid/liquid extraction and polymerization. In some cases, they are not referred to as reactors but have a name which reflects the role they perform (such as crystallizer, or bio reactor).

The sequential batch reactor (SBR) is batch process that consists of separate process steps for filling, reaction, sedimentation and discharge in one cycle. These steps run in defined timely manner and depend on the waste water to be treated. The complete division of the treatment system ensures to overcome all difficulties in the continuous process and the SBR systems can not only remove the BOD and suspended solids but it can be very effective for the removal of Ammoniacal nitrogen (NH4- N) and phosphorous (P). The SBR process ensures excellent settling characteristics of bio sludge, simplicity in operation, less foot print and very less maintenance and operation cost. In our association with technological experts, Deknomet provide a complete and comprehensive SBR solution for the industrial applications.

Sewage Treatment Plant, or domestic wastewater treatment, is the process of removing contaminants from wastewater and household sewage, both runoff (effluents) and domestic. The task of designing and constructing facilities for treating wastewaters falls to environmental engineers.

SBR (Sequential Batch Reactor)

Sequencing Batch Reactor systems represent a variation of the activated sludge process. Like any other activated sludge process, the AquaSBR USA works by developing a mixed culture of bio-floc which is effective in removing BOD (bio-chemical oxygen demand), COD (chemical oxygen demand) and nutrients commonly found in domestic waters. The AquaSBR USA can treat a wide range of domestic and industrial waste waters, at flows ranging from a few hundred cubic meters to thousands of cubic meters per day. Because the AquaSBR USA operates in a true batch treatment mode, optimum effluent quality is obtained during each cycle. Only a fraction of the total reactor volume is introduced into the reactor each cycle. This raw flow combines with the acclimated biomass, which remains in the reactor at all times. The ratio of raw flow to biomass is a key factor in obtaining desired effluent quality results from the SBR. Since only a small amount of sludge is wasted in each cycle, the quality of the biomass is always maintained. A true batch reactor system like the AquaSBR USA does not allow influent wastewater to enter the SBR reactor during final react, settle and decant phases, thereby assuring an excellent quality of final effluent.

SBR Sewage Treatment Plant

Sequential Batch Reactor

SEQUENTIAL BATCH REACTOR (SBR) TECHNOLOGY