Hydrophone

Our hydrophones are low cost solutions for underwater recording, listening and laboratory acoustics. These hydrophones come with coax/shielded cables and underwater mateable/BNC/TRS/XRL/MIL-5015 style connectors, and can be easily integrated into underwater acoustic systems. The hydrophones can be used as low power projectors to generate underwater sounds for use in laboratory, prototype commissioning try-out, experiments education on underwater acoustics, etc

We are providing a wide series of Low Frequency Hydrophones. Professionals develop these products employing the reliable component and advanced techniques. Our provided products have achieved universal popularity for their easy to use, outstanding performance, and high strength. Our products are obtainable in varied specifications. Moreover, we offer these products to our patrons at low prices. Dimensional Specifications : Material Used : SS 304 ( Or as per customer requirement)Lower Flange Dia : 45 mmUpper Flange Dia : 91 mm Length : 55 mm4 Holes for holding Hydrophone : dia 6.5 mm, PCD 72 mmPU Finsih - 3.5-5 Microns Electrical Specifications : Operating Frequency Range - 6 MHz to 5 KHzResonant Frequency : 5.5 Khz in airSensitivity : Better than -205 dBRef. to 1V/1uPa at 1 mtr.Cable and connector conform to relevant LCSO and MIL standardsThe device shall withstand a Hydrstatic pressure of 8 Kg/cm3

Thread-mount version of our popular H1a hydrophone. 1/4" NPT (National Pipe Thread) with 7/16" (12mm) wrench flats. Standard configuration includes 1/2-meter cable with stripped and tinned wire termination. Applications include industrial monitoring, and automomous or remote controlled vehicles and buoys. For custom cable lengths or output connectors, add items as needed from our connectors page. Add one cable termination fee for each connector installed. Leave notes about your application so we can be sure to correctly install your cable and connector. Important notes about connectors: We typically terminate the H1 hydrophones with either 1/4" TS or BNC connectors. Neither of these connectors will fit through the mounting hole when using the 1/4" NPT pipe mount. The 1/4" TS connector can be inserted through the mounting hole if using the panel-mount kit. Use small connectors as needed, install connectors after H1c is mounted, or connect cable directly to solder or terminal block. Connection should be shielded to avoid noise from EMI/RFI. Connector installation on hydrophone and panel-mount kit sold separately. Low cost Low self noise Good sensitivity High durability Very high dynamic range Works directly with high-impedance microphone preamps, musical instrument amps, and test equipment Compact size: 25 x 58mm (1" x 2-1/4") Convenient and secure stainless steel 1/4" pipe mount 1-year limited warranty Use with the PA1 buffer or PA6 preamp listed on our Amplifiers Page to make this device compatible with standard microphone circuits.

The VH165 hydrophone is an omnidirectional test hydrophone for data telemetry. The VH165 is used with the VR100 receiver to locate and track ultrasonic transmitters on passing fish or equipment. The VH165 operates within the 50kHz to 85kHz frequency range. The VH165 is encased in a 16 mm diameter epoxy tube at a length of 100 mm.

Hydrophone

In order to meet excellent quality standards, we are supplying Hydrophone.

The hydrophone used for exploration in deep water has the features of good stability, super seal performance, non-directional and high sensitivity. It is widely applied for prospecting in ocean, reservoir and river within 100 m depth. The product can be used with MP24 and P44A type hydrophones alternatively.

Hydrophones and hydrophone arrays

PI PURSE SEINE HYDROPHONE

We are amongst the most reputed names in the industry, offering Hydrophones.

The HFO was designed to uniquely support high intensity fields for applications such as HIFU, providing both acoustic pressure and temperature measurements simultaneously. The robustness of the fiber enables the system to withstand acoustic pressures up to 500 MPa. Operating with a visible wavelength makes the alignment process simple and safer to use.

In order to meet excellent quality standards, we are supplying Hydrophones.

Hydrophone

Hydrophone

Hydrophones

Hydrophones

Oil Filled Hydrophone Array